I don't have a DMZ setup at my location now, but it has been suggested that I may have to in the near future. So my question is this; does ISA handle the DMZ as an internal sub net or what? ----- Original Message ----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, June 20, 2002 7:55 PM Subject: [isalist] RE: External Interface & Multiple IPs > http://www.ISAserver.org > > > Hi folks; the sad truth is; ISA will reject as spoofed all non-subnet > traffic from any but the external NIC with the default gateway. > > Jim Harrison > MCP(NT4, W2K), A+, Network+, PCG > http://isaserver.org/authors/harrison/ > Read the books! > ----- Original Message ----- > From: "Jay J. Mobley" <jmobley@xxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Thursday, June 20, 2002 9:54 AM > Subject: [isalist] RE: External Interface & Multiple IPs > > > http://www.ISAserver.org > > > I dont believe that is true. (that ISA can only have 1 external IP) > I know this because I have probably 20 IPs on my external interface right > now. > Be warned however that I did come accross an issue once where I think it was > 7 IPs caused ISA to crash > but 8 was ok.. > MS has a Q article out there that explains the issue and there is a patch > for it now as I recall. > Seperate subnets shoud not pose much of a problem either > > > -Jay > > > -----Original Message----- > > From: Russ Reed [mailto:russ.reed@xxxxxxxxxxxx] > > Sent: Thursday, June 20, 2002 9:15 AM > > To: [ISAserver.org Discussion List] > > Subject: [isalist] External Interface & Multiple IPs > > > > > > http://www.ISAserver.org > > > > > > If I understand ISA correctly, you can only have 1 external > > IP address? > > > > Assuming this is true, any suggestions on how I should > > configure my ISA > > server/network for 2 different IP addresses (with 2 different > > subnets)? > > > > Background: > > We are a small business with a cable modem as our main > > internet access (we > > have 4 public address, only using 1). To provide backup > > internet access, > > we are getting wireless internet access (with 1 public IP > > address). I need > > to publish servers (the same internal server) on both external IP > > addresses. > > > > Can I do this with ISA? > > > > Russ > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion > > List as: jmobley@xxxxxxxxxx > > To unsubscribe send a blank email to > > $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: burnsc@xxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') >