Re: Error 278540
- From: "Nick Chadwick" <nick@xxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 27 Sep 2001 15:42:08 +0100
Ok, I stopped RRAS, then started isactrl. And it started! So then I started
RRAS...and isactrl "stopped itself". What is going on now?!
Nick Chadwick
Development & Technical Support Manager
Comsoft Limited, UK
Tel: +44-(0)20-8240-4452 Fax: +44-(0)20-8240-4449 Mobile: +44-(0)7740-362408
Email: nick@xxxxxxxxxxxxxx < mailto:nick@xxxxxxxxxxxxxx>
Web: http://www.comsoft.ltd.uk/
-----Original Message-----
From: RogersB@xxxxxxxxxxxxxx [mailto:RogersB@xxxxxxxxxxxxxx]
Sent: 27 September 2001 15:45
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Error 278540
http://www.ISAserver.org
MY ISA service wont start if RRAS is running. I have set RRAS to depend on ISA
service to start. After that everything is just fine.
However the error in my event log was specific "ISA cannot start because RRAS
is running...."
-----Original Message-----
From: Nick Chadwick [ mailto:nick@xxxxxxxxxxxxxx]
Sent: Thursday, September 27, 2001 10:31 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Error 278540
http://www.ISAserver.org
I tell a lie...the Services console does show that RRAS is dependent on
isactrl. BUT how come RRAS is started, when isactrl isn't? Now I'm confused!
Nick Chadwick
Development & Technical Support Manager
Comsoft Limited, UK
Tel: +44-(0)20-8240-4452 Fax: +44-(0)20-8240-4449 Mobile: +44-(0)7740-362408
Email: nick@xxxxxxxxxxxxxx < mailto:nick@xxxxxxxxxxxxxx>
Web: http://www.comsoft.ltd.uk/
-----Original Message-----
From: Jim Harrison [ mailto:jim@xxxxxxxxxxxx]
Sent: 27 September 2001 15:05
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Error 278540
http://www.ISAserver.org
Check your RasMan service; isactrl has a dependency on that.
Jim Harrison
MCP(2K), A+, Network+, PCG
----- Original Message -----
From: "Nick Chadwick" <nick@xxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Thursday, September 27, 2001 7:03 AM
Subject: [isalist] Re: Error 278540
http://www.ISAserver.org
Jim,
Nope, haven't changed either security settings or service startups. I didn't
reboot the machine, just restarted the services...or tried to. There are no
other errors in event log.
Nick Chadwick
Development & Technical Support Manager
Comsoft Limited, UK
Tel: +44-(0)20-8240-4452 Fax: +44-(0)20-8240-4449 Mobile:
+44-(0)7740-362408
Email: nick@xxxxxxxxxxxxxx < mailto:nick@xxxxxxxxxxxxxx>
Web: http://www.comsoft.ltd.uk/
-----Original Message-----
From: Jim Harrison [ mailto:jim@xxxxxxxxxxxx]
Sent: 27 September 2001 14:39
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Error 278540
http://www.ISAserver.org
Have you changed any security settings?
Have you changed any service startups?
What other errors are in the event log?
Jim Harrison
MCP(2K), A+, Network+, PCG
----- Original Message -----
From: "Nick Chadwick" <nick@xxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Thursday, September 27, 2001 3:10 AM
Subject: [isalist] Error 278540
http://www.ISAserver.org
I just tried to restart my ISA services, and isactrl is failing with error
278540. Help!
Nick Chadwick
Development & Technical Support Manager
Comsoft Limited, UK
Tel: +44-(0)20-8240-4452 Fax: +44-(0)20-8240-4449 Mobile:
+44-(0)7740-362408
Email: nick@xxxxxxxxxxxxxx < mailto:nick@xxxxxxxxxxxxxx>
Web: http://www.comsoft.ltd.uk/
-----Original Message-----
From: ernest.geyskens@xxxxxxxx [ mailto:ernest.geyskens@xxxxxxxx]
Sent: 27 September 2001 10:31
To: [ISAserver.org Discussion List]
Subject: [isalist] ISA & NetMeeting
http://www.ISAserver.org
Two weeks ago, I sent the following message.
Since that, I had no real respons and solutions.
Can someone help me with this problem ?
Thank you at all the group,
Ernest Geyskens
Responsable du développement des nouvelles technologies
Assistant Informatique & Bureautique
Ceran Lingua International (CLI)
Direct Phone : +32 (0) 87 791 237
Fax : +32 (0) 87 791 199
Email : Ernest.Geyskens@xxxxxxxx
URL: http://www.ceran.com
-------------------------------------------------------
Since a lot of time, I try to resolve a problem with ISA Server.
Nobody is able to give me a solution.
We would like to make NetMeeting via our ISA Server.
For the moment, we search only to make outgoing call.
If we follow all the instructions (Microsoft, Shinder, ...), we do not
need
to configure a Gatekeeper.
Then I configure the H.323 Protocol as well as the H.323 Application
filter.
After that :
- We can make a call.
- We can chat.
- The other people can hear me very well.
But ..
- I can't hear him and see him.
We work on a Network with NT 4 WorkStations.
The ISA server is Winbdows 2000 Server.
Please, can someone say me if there is a solution, an article or any
information
or instruction I can get to do that ?
Thank you in advance.
Ernest Geyskens.
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
nick@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
**********************************************************************
Disclaimer: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail and then
permanently delete the message from your computer. If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on the e-mail.
The opinion expressed in this Email is that of the author and not
necessarily that of Comsoft Limited.
While attachments are virus checked, Comsoft Limited do not accept any
liability in respect of a virus which is not detected.
**********************************************************************
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
nick@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
**********************************************************************
Disclaimer: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail and then
permanently delete the message from your computer. If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on the e-mail.
The opinion expressed in this Email is that of the author and not
necessarily that of Comsoft Limited.
While attachments are virus checked, Comsoft Limited do not accept any
liability in respect of a virus which is not detected.
**********************************************************************
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
nick@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
**********************************************************************
Disclaimer: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail and then
permanently delete the message from your computer. If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on the e-mail.
The opinion expressed in this Email is that of the author and not
necessarily that of Comsoft Limited.
While attachments are virus checked, Comsoft Limited do not accept any
liability in respect of a virus which is not detected.
**********************************************************************
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
rogersb@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
nick@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
**********************************************************************
Disclaimer: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail and then
permanently delete the message from your computer. If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on the e-mail.
The opinion expressed in this Email is that of the author and not
necessarily that of Comsoft Limited.
While attachments are virus checked, Comsoft Limited do not accept any
liability in respect of a virus which is not detected.
**********************************************************************
Other related posts:
