Re: Dialup wilt satalite card
- From: "Shaun Gurden" <ShaunGurden@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 7 Dec 2001 09:23:39 +1300
Thanks Jim,
Thought as much.
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: Friday, 7 December 2001 3:46 a.m.
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Dialup wilt satalite card
http://www.ISAserver.org
ISA doesn't understand splitting of the external interface like that.
It
expects a single interface for the "external" one.
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
----- Original Message -----
From: "Shaun Gurden" <shaung@xxxxxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Wednesday, December 05, 2001 15:12
Subject: [isalist] Dialup wilt satalite card
http://www.ISAserver.org
Is it possible to configure an ISA box with the following hardware.
I have a ISDN modem for the uplink to the ISP and a Telemann SM200DTP
for
the downlink and of course an ethernet card for the LAN.
Without ISA installed it connects fine and get a decent DL. However
when
ISA is running it does not work with the SM200DTP, only totally via the
modem. I suspect that ISA is expecting the DL from the modem because of
the low level nature of the program.
If anyione out there has a slimilar configuration working please let me
know.
Thanks
Shaun
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
shaung@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
