ISA doesn't understand splitting of the external interface like that. It expects a single interface for the "external" one. Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ ----- Original Message ----- From: "Shaun Gurden" <shaung@xxxxxxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, December 05, 2001 15:12 Subject: [isalist] Dialup wilt satalite card http://www.ISAserver.org Is it possible to configure an ISA box with the following hardware. I have a ISDN modem for the uplink to the ISP and a Telemann SM200DTP for the downlink and of course an ethernet card for the LAN. Without ISA installed it connects fine and get a decent DL. However when ISA is running it does not work with the SM200DTP, only totally via the modem. I suspect that ISA is expecting the DL from the modem because of the low level nature of the program. If anyione out there has a slimilar configuration working please let me know. Thanks Shaun ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')