Well, most of the routes are based off the NIC card settings. BUT, there is one static route that persists, which I entered in manually - it's the one that routes another 192 network over a WAN link across town. But other than that, that's it. So what should I do next? Thanks, Mike -----Original Message----- From: Periyasamy, Raj [mailto:psraj@xxxxxxxxxxxx] Sent: Friday, November 16, 2001 10:45 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Default Route Problem http://www.ISAserver.org Are you using a static route table? Regards, Raj -----Original Message----- From: Michael Anderson [mailto:mike@xxxxxxxxxxxxxxxx] Sent: November 16, 2001 11:34 AM To: [ISAserver.org Discussion List] Subject: [isalist] Default Route Problem http://www.ISAserver.org Hello, I am having a weird problem with our ISA Server. We have 3 NIC cards in our server. One NIC is for our Internal "192" private network. The other 2 NIC's go to the actual Internet - out 2 separate high-speed connections - for redundancy. One connection goes out an ISDN connection, and the other one goes out a Cable Modem connection. Since the Cable Modem connection is the fastest one, I have an interface Metric of "1" on that one - so the high-speed connection is the default. I purposely put a Metric of "20" on the ISDN one, since it's the slower one. Every couple of days, the default route reverts to the ISDN connection - which is something we don't want! Does anybody have any theories why the machine would activate the alternate route - especially since it has a Metric of 20 versus 1? And is there any way to lock in that default route, so it never goes out the other connection, until it absolutely has to? Thanks for any information offered, Mike ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: psraj@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: mike@xxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')