Hi Jim, Your file link is not found. Joseph -----Original Message----- From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] Sent: Wednesday, March 27, 2002 8:19 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: DHCP / BOOTP problems when geting IP from ISP (Telia) http://www.ISAserver.org More likely, the problem is: 1. the DHCP packet filter is not enabled 2. you need to stop the ISA services, renew the lease and restart the ISA services This is a known issue with DHCP on some ISPs. Use the script at www.jalojash.org/isascripts/isa_ip_renew.vbs Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "David" <david_agner@xxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Monday, March 25, 2002 4:44 AM Subject: [isalist] DHCP / BOOTP problems when geting IP from ISP (Telia) http://www.ISAserver.org Problem is as follows: When the Isa service is started it runs as it should, but when W2K is trying to get a new leas from the ISP (Telia) it reject it and W2K is then using the old MS ip's (169....) I think the problem might be that the ISP is not using DHCP but BOOTP instead. Any known workarounds ? Cheers David ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: cismic@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')