Hello, How can one control the routes that are added to a pptp client when it is added? There is the situation (I have changed the actual IPs): The pptp server allows access to 192.168.100.0/22, 192.168.24.0/24, and 192.168.26/24. The rest of the 192.168.x.x address space is not available through the pptp tunnel. When the client connects the following routes are added to the client (the pptp net is 192.168.24.0/24). 192.168.0.0 255.255.0.0 192.168.24.56 192.168.24.56 1 192.168.24.0 255.255.255.128 192.168.24.56 192.168.24.56 1 192.168.24.56 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.255.255 255.255.255.255 192.168.24.56 128.84.227.56 50 224.0.0.0 240.0.0.0 192.168.24.56 192.168.24.56 50 My question is why is the 192.168.0.0 route added? The pptp server is not able to route to this entire network. What I would like to be able to do is pass the specific subnets to the client to have them added to the cliets routing table. Is this possible. Thanks Bill