RE: Connecting to an NTP server through ISA

  • From: "Stefaan Pouseele" <stefaan.pouseele@xxxxxxx>
  • To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
  • Date: Sun, 7 Apr 2002 23:58:55 +0200

Hi Don,

the most elegant solution is to make ISA your timeserver for the whole
internal network. I suggest you look at
ftp://ftp.tacteam.net/isaserver/nettime.zip . All documentation is included.

Regards,
Stefaan

-----Original Message-----
From: DMcCall@xxxxxxxxxx [mailto:DMcCall@xxxxxxxxxx]
Sent: zondag 7 april 2002 23:49
To: [ISAserver.org Discussion List]
Subject: [isalist] Connecting to an NTP server through ISA


http://www.ISAserver.org



I am trying to set up so that our domain can obtain time from an NTP server.
The query appears to go out through the ISA OK however the error I get on
our local sntp server (in the system event log) is "event id 11 The NTP
server  didn't respond "  I have set up a protocol rule for NTP to the local
sntp server. Has anyone out there done this and if so how should it be done?
Any Help would be appreciated.

Thank you

        Don McCall     Email: dmccall@xxxxxxxxxx
        Infrastructure Administrator - Information Systems
        Baptist Community Services NSW & ACT
        Website: <www.bcs.org.au>  - Telephone: (02) 9941 6054
                                                      Fax: (02) 9889 1520
        Address: Corporate Services - 157 Balaclava Road Marsfield NSW 2122




This message is intended for the addressee named and may
contain confidential information. If you are not the intended
recipient, please delete it and notify the sender. Views
expressed in this message are those of the individual sender,
and are not necessarily the views of Baptist Community Services.



------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
stefaan.pouseele@xxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')



Other related posts: