Si sabes castellano mejor tengo algunas y dudas y podría solucionarte algunas Mi problemas es el siguiente Para accede a www.aeat.es <http://www.aeat.es/> en los cliente en la parte que te obliga a tener certificados para acceso privado me pide que le abra los puertos Del 8000 al 8009 y no se como coño hacer el tema y me estoy volviendo loco debe de ser simple pero no doy con el tema Te agradecería tu ayuda. Gracias de Antemano Atentamente José E. Ibarra -----Mensaje original----- De: Luis Rodriguez [mailto:lrodriguez@xxxxxxxxxx] Enviado el: jueves, 04 de abril de 2002 19:18 Para: [ISAserver.org Discussion List] Asunto: RE: [isalist] Configuration Of ISA 2000 Hi, I also have the same problem. Were you able to solve it. -----Original Message----- From: Kojac [mailto:kojac2000@xxxxxxxxx] Sent: Thu 4/4/2002 11:47 AM To: [ISAserver.org Discussion List] Cc: Subject: [isalist] Configuration Of ISA 2000 http://www.ISAserver.org I have configured isa server 2000 with 3 nic. one nic is public x.x.x.x and the other nic are private: nic2:192.168.0.1 and nic3:192.168.1.1. The two ip are private and they are on the LAT: from 192.168.0.0 to 192.168.0.255 from 192.168.1.0 to 192.168.1.255 I have published a mail server with ip 192.168.1.4(Mail server is SecureNAT client) mapped to ip of the external interface of isa:x.x.x.x with gateway:192.168.1.1(nic3 isa)( 100.100.100.100 is also the mx record of my domain ). I have enabled the routing by Packet Filtering property I have 5 clients snat on the subnet 192.168.0.x and one mail server snat and one client snat on the subnet 192.168.1.x The clients on the two subnet can to comunicate thanks by enable routing of Packet Filtering I make this command (telnet x.x.x.x 25) on a client sNAT 192.168.1.10 and i don't receive a reply while when i make this command: telnet 192.168.1.4 25 the server SMTP respond. Then from client snat 192.168.0.10 whit the command : telnet x.x.x.x 25 the mail server respond Can someone help me? ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: lrodriguez@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')