I have it working on my istallation. Its been a while, and that article had to be my best resource for setting it up. most important: - the altaddr command on the Citrix server to tell it what IP address to spoof - setting your CTXXML svc to run on an alternate port - Setting your Program neighborhood to connect to that IP... there is a 'firewall' checkbox there somewhere that needs to be checked Sorry if its not too descriptive.. its been a while since I have to futz with this at all.. let me know if that helps.. if not ill go back and look at my configuration and see what else might be hanging u up -Jay -----Original Message-- From: Jason Beckett [mailto:jbeckett@xxxxxxxxxxxxxxxxxx] Sent: Wednesday, January 16, 2002 11:07 AM To: [ISAserver.org Discussion List] Subject: [isalist] Citrix, Do I have to open..... http://www.ISAserver.org How do I publish I Citrix server properly, I followed the steps on isaserver.org but it still does not work. Could someone if you know how to publish your citrix server I would love to know how! Thank you for your time, Jason Beckett Musson Cattell Mackey Partnership Architects, Designers and Planners 1825 Two Bentall Centre, 555 Burrard Street, Box 264 Vancouver, British Columbia CANADA, V7X 1M9 Ph: (604) 687-2990 ext: 1031 Fax: (604) 687-1771 Email: <mailto:jbeckett@xxxxxxxxxxxxxxxxxx> jbeckett@xxxxxxxxxxxxxxxxxx Website: <http://www.mcmparchitects.com> www.mcmparchitects.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jmobley@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')