Thanks Jim! that was it. I knew it was something simple! joe __________________________________________ Joseph H Leek JHL Mail Marketing, Inc. 3100 Borham Avenue Stevens Point WI 54481-5094 Phone: 715.341.0581 x 11 Fax: 715.341.9645 Email: joe@xxxxxxx -----Original Message----- From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] Sent: Monday, July 08, 2002 10:28 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: Changing Exchange Servers http://www.ISAserver.org Is the second server a SecureNAT client (default gateway = ISA int IP)? Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: Joe Leek <mailto:joe@xxxxxxx> To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx> Sent: Monday, July 08, 2002 7:43 AM Subject: [isalist] Changing Exchange Servers http://www.ISAserver.org Hi all: I currently have an exchange server (192.x.x.2) published behind ISA. I am trying to change to a different box (192.x.x.7) behind the firewall. My problem is that after making the changes on the isa server, smtp and pop do not answer properly. On the old server I get the standard headers when I try to telnet in on port 25/110, when I change to the new box, telnet just hangs there with no answer on either port. I am using the exchange server wizard to publish, but I must be missing something. tia joe __________________________________________ Joseph H Leek JHL Mail Marketing, Inc. 3100 Borham Avenue Stevens Point WI 54481-5094 Phone: 715.341.0581 x 11 Fax: 715.341.9645 Email: joe@xxxxxxx ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: joe@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')