All of a sudden, I am unable to telnet out from any of my private networks out through the External connection. I have the rule there, but it is not going out. I check it in the Logs & Reports, and it states that "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond." The only change I've made recently is to add ISP redundancy, but if I remove that, I still get the connection failure. Finally, if I telnet out the TMG host machine, I can telnet successfully. It's only when I use any of my Internal networks that I have the issue. Any hints? I am using TMG 2010, Windows Server 2008 R2 SP1 x64. Any help is appreciated. Thanks in advance. Steve Comeau Associate Director of IT Rutgers Athletics - RAC 83 Rockafeller Road Piscataway, NJ 08854 732-445-7802 732-445-4623 (fax) www.scarletknights.com<http://www.scarletknights.com/> [cid:image005.png@01CE92DF.C47A3A30] [cid:image006.jpg@01CE92DF.C47A3A30] *** This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Rutgers University - DIA 83 Rockafeller Road Piscataway, NJ 08854 www.scarletknights.com ***