Does SMTP server publishing to this server work? Have you enabled POP3 on the Exch server (it's off, by default). -----Original Message----- From: Wittaya Lee [mailto:wittalee@xxxxxxxxxxxxxxxxxx] Sent: Thursday, March 16, 2006 4:08 AM To: [ISAserver.org Discussion List] Subject: [isalist] Can't Publishing POP3 behind ISA2004 EE with FE-BE exchange 2003 SP2 designed http://www.ISAserver.org Dear All, I have forced to publishing POP3 services on the ISA2004 EE with SP2, even I already configured published OWA, and RPC over HTTP. The ISA is designed as a back-end firewall. Exchange Front-end and Back-end are sit in the Secusre Zone. I have to publishing POP3 for branches, and internal Head office. At the internal Head office, I decided to set Outlook point directly to Exchange Front-end. And it work just fine. The problem is on the Branches. I configured ISA to publish POP3 with listening on Perimeter Network, Protocol POP3 Server (as publishing rule autometic generated or 110 inbound), and TO Exchange Front-end. I put the IP-address of Exchange Front-end and POP3.comany.com address in hosts file. Then, I configured Outlook express to connect POP3 server with ISA' IP-address on the Perimeter network card. And place the Client on the DMZ zone. When tried to connect the server with Outlook express, it has an error shown the connection to the server has failed Accout 'Test', Server ' POP3.company.com', Port 110, Secure(SSL): No, Socket Error:10061, Error Number 0x800CC0E. I'd monitored the ISA, and log shown only POP3 Outbound Initialed and Closed. No POP3 inbound as Publishing rule connection attemped. The same error occured when I configured Outlook Express at Branch Office to connect POP3 server as the real address. The front End firewall maps static NAT to ISA server. Well, does Any one know how to configured publishing POP3 as in my organization network? The following is the Network Diagram (in Text mode) : Branch Client --Outlook Express ---> Front-End Firewall -----Allow POP3 -------> ISA2004EE (Publishing POP3) ---------> Exchange Front-End -------> Exchange Back-End In coming Branch Client ---NAT--> Front-End Firewall ----Static NAT only POP3 service---> ISA2004 EE --ROUTE---> Exchange Front-End ----ROUTE---> Exchange Back-End Out going Branch Client <--NAT --- Front-End Firewall <--------NAT------ ISA2004 EE <----Route--Exchange Front-End <-------Route --- Exchange Back-End Please help, and Thank you in advance, Witt ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=isalist Report abuse to listadmin@xxxxxxxxxxxxx All mail to and from this domain is GFI-scanned.