The ports and protocols are the same; just define them in reverse of what the publishing docs say. Jim Harrison MCP(2K), A+, Network+, PCG ----- Original Message ----- From: "Larry Thompson" <lthompson@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, October 04, 2001 10:58 Subject: [isalist] Re: Allow access from one firewall client to a remote Citrix Server http://www.ISAserver.org Unfortunately they are dealing with a Citrix server on the private side of the ISA server, I am trying to access the Citrix server over the Internet from behind my ISA server. I can do it with the IE 5.5 browser just fine if the ISA server is not in place. It is doing its job, I just need to determine how to open up the correct ports to communicate Larry Thompson -----Original Message----- From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] Sent: Thursday, October 04, 2001 12:00 PM To: [ISAserver.org Discussion List] Subject: [isalist] Re: Allow access from one firewall client to a remote Citrix Server http://www.ISAserver.org If you look at the Learning Zone on isaserver.org, there are articles dealing specifically with Citrix. Jim Harrison MCP(2K), A+, Network+, PCG ----- Original Message ----- From: "Larry Thompson" <lthompson@xxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, October 04, 2001 09:06 Subject: [isalist] Allow access from one firewall client to a remote Citrix Server http://www.ISAserver.org I have a range of IPs for the citrix server, the ports required are UDP 1604 Send/Receive and TCP 1494 inbound. Access is attempted through IE 5.5 through the ISA server. I have not successfully set up the protocol to allow connection. What needs to be done? ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: lthompson@xxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')