Ok, ok; take a long breath... The web proxy service uses a pared-down version of the FTP application filter. I believe that it only operates in PASV (Tom may correct me on this)... Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "Bogdan Florin" <florinb@xxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Friday, January 25, 2002 13:59 Subject: [isalist] Re: Active to pasive http://www.ISAserver.org ISa server it have Gateway: 217156.38.1 Customers clients it have same gateway ! but it have IE setup to use proxy server (ISA SERVER) This is NOT SECURE NAT ! This is not FIREWALL CLIENTS ! It is a simple setup of USE PROXY SERVER ... Yours sincerely, Bogdan Florin manager BizarNet - Satellite Internet Services www.bizarnet.ro phone: +40-64-426507 gsm: : +40-90-074031 -----Original Message----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Date: Fri, 25 Jan 2002 07:12:16 -0800 Subject: [isalist] Re: Active to pasive > http://www.ISAserver.org > > > OK, pull my head out... <pop> > Yep, we just can't get enough of each other (don't tell my wife or Tom) > ;-) > > Are the internal hosts secureNAT or Firewall clients? > SecureNAT clients can't use any protocol that requires secondary > connections. > > Jim Harrison > MCP(NT4, W2K), A+, Network+, PCG > http://isaserver.org/authors/harrison/ > Read the books! > > ----- Original Message ----- > From: "Bogdan Florin" <florinb@xxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Thursday, January 24, 2002 08:17 > Subject: [isalist] Re: Active to pasive > > > http://www.ISAserver.org > > > My dear Sir, > we meet again also this list :)) > > I own a satelite ONE WAY service. > Another company UPLINK the Internet to satelite. I'm joust the manager > and owner to this service. (europe) > > At out headquarter in Ro I have a ISA server. When my cusstomers try to > acces some FTP sites trought this isa (who have a VPN with satelite UP > LINK STATION) they got an ext3ended error messages. > > ISA Server: extended error message : > 200 Type okay. > 200 PORT command successful. > 550 Cannot connect to 62.41.25.3:35457 - Connection refused. > > This is becuase the UPLINK platform are setup to work in PASIVE MODE > when > handle the FTP. > > So I have few choice > - setup ISA to work in PASIVE MODE when handle the FTP acces > - setup entire platfirm to work in ACTIVE MODE (it is a little bit > harder) > - drop the business and go to mointanis for meditation and pray :) > > Please look very carefully and advice me beucase it pass more than 3 > months I try to find a solution for this. > > Yours sincerely, > > Bogdan Florin > manager > BizarNet - Satellite Internet Services > www.bizarnet.ro > phone: +40-64-426507 > gsm: : +40-90-074031 > > > -----Original Message----- > From: "Jim Harrison" <jim@xxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Date: Thu, 24 Jan 2002 08:05:26 -0800 > Subject: [isalist] Re: Active to pasive > > > http://www.ISAserver.org > > > > > > I don't understand; what do you mean "active" and "passive"? > > > > Jim Harrison > > MCP(NT4, W2K), A+, Network+, PCG > > http://isaserver.org/authors/harrison/ > > Read the books! > > > > ----- Original Message ----- > > From: "Bogdan Florin" <florinb@xxxxxxxxxxx> > > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > > Sent: Thursday, January 24, 2002 07:38 > > Subject: [isalist] Active to pasive > > > > > > http://www.ISAserver.org > > > > > > Anyone know if we can setup ISA to switch from Active to pasive mode > > working ? > > > > Yours sincerely, > > > > Bogdan Florin > > manager > > BizarNet - Satellite Internet Services > > www.bizarnet.ro > > phone: +40-64-426507 > > gsm: : +40-90-074031 > > > > > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List > as: > > jim@xxxxxxxxxxxx > > To unsubscribe send a blank email to > > $subst('Email.Unsub') > > > > > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List > as: > > florinb@xxxxxxxxxxx > > To unsubscribe send a blank email to > > $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to > $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > florinb@xxxxxxxxxxx > To unsubscribe send a blank email to > $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')