RE: A good one

  • From: "John Tolmachoff" <isalist@xxxxxxxxxxxx>
  • To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
  • Date: Wed, 5 Feb 2003 16:03:29 -0800

I am not sure if it would be listed as a service, more of a direction to
look at. Try searching MS KB on how to start it or one of the newsgroups.

I know I have read some where before there is a way. Sorry I do not remember
where.

John Tolmachoff MCSE, CSSA
IT Manager, Network Engineer
RelianceSoft, Inc.
Fullerton, CA  92835
www.reliancesoft.com


> -----Original Message-----
> From: Mark Strangways [mailto:strangconst@xxxxxxxxxx]
> Sent: Wednesday, February 05, 2003 3:55 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] RE: A good one
> 
> http://www.ISAserver.org
> 
> 
> Thanks for the reply John,
> 
> I could not find any reference to the firewall client app in the services
> snap-in.
> Do your client pc's have a reference to it in there services ?
> 
> regards,
> 
> Mark S
> ----- Original Message -----
> From: "John Tolmachoff" <isalist@xxxxxxxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Sent: Wednesday, February 05, 2003 11:32 AM
> Subject: [isalist] RE: A good one
> 
> 
> http://www.ISAserver.org
> 
> 
> Sounds like a service start up timing issue.
> 
> You might want to search of service start delays, or in the services play
> with dependencies so that one service will not start until something else
> does.
> 
> Be careful of what you do there.
> 
> John Tolmachoff MCSE, CSSA
> IT Manager, Network Engineer
> RelianceSoft, Inc.
> Fullerton, CA  92835
> www.reliancesoft.com
> 
> 
> > -----Original Message-----
> > From: Mark Strangways [mailto:strangconst@xxxxxxxxxx]
> > Sent: Tuesday, February 04, 2003 8:52 PM
> > To: [ISAserver.org Discussion List]
> > Subject: [isalist] A good one
> >
> > http://www.ISAserver.org
> >
> >
> > Ok, here it is... My big problem :-)
> >
> > Don't start Jim ;-)
> >
> > When I fire up my laptop with the PCMCIA LAN card in it and the FW
client
> > enabled, I cannot get any response from the DHCP (one ISA box). If I
> disable
> > FW Client, I get an IP and network is fine. If I enable the FW Client
but
> > remove the card, start up machine, then wait till everything loads
insert
> > card I get an IP and network is OK.
> >
> > Anyone else have similar issues, or am I special.
> > I have gone thru 3 different cards, all do the same to a certain degree.
A
> > Dink card was the best, it  would grab an IP MOST of the time.
> >
> > ISA win 2k SP3, ISA SP1..
> > Client win 2k SP3 (pro).
> >
> > Anyone ?
> >
> > Thanks in advance..
> >
> > Mark S
> >
> >
> > ------------------------------------------------------
> > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> > ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> > ------------------------------------------------------
> > Exchange Server Resource Site: http://www.msexchange.org/
> > Windows Security Resource Site: http://www.windowsecurity.com/
> > Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List as:
> > isalist@xxxxxxxxxxxx
> > To unsubscribe send a blank email to $subst('Email.Unsub')
> 
> 
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Exchange Server Resource Site: http://www.msexchange.org/
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> strangconst@xxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
> 
> 
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Exchange Server Resource Site: http://www.msexchange.org/
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> isalist@xxxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')



Other related posts: