Re: 12206 - proxy chain loop
- From: "Bob Cheeseman" <bob@xxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sat, 5 Jan 2002 12:11:02 -0500
That's for sure, I've been doing this for a long time and
never have I noticed that advanced option.
Got the ftp working. now on to internal Terminal servers.
-----Original Message-----
From: Feign, Cory [mailto:cfeign@xxxxxxxxxxxxxxx]
Sent: Saturday, January 05, 2002 11:55 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: 12206 - proxy chain loop
http://www.ISAserver.org
Well I'm not sure if this will help but I just had a single
isa server that
needed to have the binding order reversed. Right click
nethood, properties.
Then you'll see your network connections. There is a menu
item "advanced"
(I never noticed it either and I went for trainng and am 2"
cert, weird) and
that's where you can set the binding order. One time when I
rebooted the
switched order such that the internal services(netlogon etc)
bound to the
external nic, and although I could see network resources I
couldn't
authenticate. The point is, the binding order is more or
less in a
different place than it was in nt4.
Cory
-----Original Message-----
From: Mark Strangways <strangconst@xxxxxxxxxx>
To: [ISAserver.org Discussion List] <isalist@xxxxxxxxxxxxx>
Sent: Sat Jan 05 10:38:13 2002
Subject: [isalist] Re: 12206 - proxy chain loop
http://www.ISAserver.org
Agreed, that is one of the poorest written KB articles I
have read.
Leaves you wondering what they are talking about.
Regards,
Mark S
----- Original Message -----
From: "Bob Cheeseman" <bob@xxxxxxxxxxx>
To: "[ISAserver.org Discussion List]"
<isalist@xxxxxxxxxxxxx>
Sent: Saturday, January 05, 2002 11:07 AM
Subject: [isalist] Re: 12206 - proxy chain loop
> http://www.ISAserver.org
>
>
> I have been reading this same article, but it makes no
> sense.
>
> RESOLUTION
> To resolve this behavior, remove the external DNS server
> address from the external network adapter, and then change
> the binding order on ISA Server so that the internal
network
> adapter is listed first:
>
> Click Network and Dial-Up connections .
>
>
> On the Advanced menu, click Advanced Settings to display
the
> binding order.
>
>
> Click the internal network adapter, and then move it to
the
> top. The internal DNS is used to resolve the server name
so
> that redirection works properly.
>
> The above instructions do not seem to make any sense.
>
> Move what to the top, and where?
>
> Thanx
>
> Bob
>
>
>
>
> -----Original Message-----
> From: Richard J. Manning
> [mailto:richardmanning@xxxxxxxxxxxx]
> Sent: Saturday, January 05, 2002 10:32 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Re: 12206 - proxy chain loop
>
>
> http://www.ISAserver.org
>
>
>
>
http://support.microsoft.com/directory/article.asp?ID=KB;EN-
> US;Q296202
>
> Regards
>
> ----- Original Message -----
> From: "Bob Cheeseman" <bob@xxxxxxxxxxx>
> To: "[ISAserver.org Discussion List]"
> <isalist@xxxxxxxxxxxxx>
> Sent: Saturday, January 05, 2002 3:07 PM
> Subject: [isalist] 12206 - proxy chain loop
>
>
> > http://www.ISAserver.org
> >
> >
> > any one have any thoughts on where to look to resolve
this
> > web publishing problem?
> >
> >
> >
> > 12206 - proxy chain loop
> > Internet Security and Acceleration Server
> >
>
> ----------------------------------------------------------
> --
> > --------------------
> >
> > Technical Information (for support personnel)
> >
> > Background:
> > The server has detected a proxy chain loop. This
condition
> > might indicate a configuration problem in a proxy
server.
> >
> > ISA Server: aeryx-sbs.Aeryx.com
> > Via: 1.1 AERYX-SBS, 1.0 AERYX-SBS, 1.0 AERYX-SBS
> > URL: /
> > Time: 1/5/2002 3:01:00 PM
> >
> >
> > Thanx & Regards
> >
> > Bob Cheeseman
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org
> Discussion List as:
> richardmanning@xxxxxxxxxxxx
> > To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org
> Discussion List as: bob@xxxxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org
Discussion List as:
strangconst@xxxxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org
Discussion List as:
cfeign@xxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org
Discussion List as: bob@xxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
