[Ilugc] eth initialization problem

  • From: babu_jayapaul@xxxxxxxxx (babu jayapaul)
  • Date: Mon Aug 30 12:03:32 2004

In my FC2 system which has 2 onboard NIC's. Intel Corp
10/100 Card (eth0) and Intel Corp 100/1000 (eth1).

When my system boots up eth0 (intel 10/100) is
activated. but eth1 (intel 100/100) is disabled with
the following error.

"e1000 device eth1 does not seem to be present,
delaying initialization."

I can able to only eth0 if use ifconfig.

I have also restarted the network service. I getting
the same error.

but the card is present when i use 'lspci'

=================================================
00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5)
Serial ATA 150 Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R)
SMBus Controller (rev 02)
-------------------------------------------------
02:01.0 Ethernet controller: Intel Corp. 82547EI
Gigabit Ethernet Controller (LOM)
--------------------------------------------------
03:00.0 SCSI storage controller: Adaptec
AHA-2940U/UW/D / AIC-7881U
03:06.0 VGA compatible controller: ATI Technologies
Inc Rage XL (rev 27)
03:08.0 Ethernet controller: Intel Corp. 82562EZ
10/100 Ethernet Controller (rev 01)
[root@linux3 root]#
===================================================

please help to activate with out error



                
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail ;

Other related posts: