[Ilugc] Help: Installation of Video / Sound / Modem Drivers - RH Ver 8.0

From: sriram.narayanan@xxxxxxxxxxxxx (sriram.narayanan@xxxxxxxxxxxxx)
Date: Fri, 15 Nov 2002 08:53:38 +0530

This is a multi-part message in MIME format.

------=_NextPartTM-000-98a8b7c5-f7d9-11d6-9c08-00b0d020d9fd
Content-type: text/plain; charset=us-ascii

Sanjay,

Thanks for your mail Sanjay. But, I have tried all that you have mentioned
with respect to the XConfig (switching low to high reso) and also the
sndconfig for the Sound Card thru the Text login, but no agains as yet. The
Sound Card gets deducted by sndconfig probe correctly but the Drivers which
gets installed for the same is i810 chipset drivers. And the Video Card got
deducted while installing but display was not proper, later on trying with
the Xconfigurator the Video Card is getting deducted only as i810 Intel.

I have looked around with Redhat official site as well as Intel Support
Home Pages no agains as yet.

Let me try for somemore time before switching back to windows...

Thanx
-Sriram



                    Sanjay Chigurupati

                    <sanjay_chigurupati@        To:
sriram.narayanan@xxxxxxxxxxxxx
                    yahoo.com>                  cc:

                                                Subject:     Re: [Ilugc] Help:
Installation of Video / Sound / Modem
                    15/11/2002 02:15 AM         Drivers - RH Ver 8.0






,

1. X Configurator auto deducted my on-board Video
Card by installed the
i810/815 Chipset Video Drivers I think... due to
which, the X when started
distorted image appears on the screen.., but I am
able to login, after the
resolution is such that the fonts are too big and
everything id out of
focus in the monitor.

Try pressing ctrl+shift and '+' key together or try
same with ctrl+shift and '-' key. that will let u
switch different screen resolutions. u must be gettin
a low resolution (like below 640 *480 or maybe
640*480). There is a way to fix it by editing the
config file, but I dont remember the name of the file.

2. The Sound test was performed after in the final
stages of installation,
but the sound did not play on testing the same.

I think the command for this sndconfig. Let me check
on this. I just installed RH 8. look up manual for
your motherboard, if you have it. else go 2 Intel site
and download it. it should mention the compatibility
of ur sound drivers.

I havent checked my sound yet. look at control panel
under settings and then go to device manager under
system and refer under sound, video and game
controllers, in WIndows. It should give you the model
and look at properties to figure out ports and IRQs.

U might need the port and IRQ info.

3. I am using a DAX 56k External Modem, which was
also not deducted by
Redhat Linux...

Havent gotten there yet with RH 8

bye,
sanjay

__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - Let the expert host your site
http://webhosting.yahoo.com

------=_NextPartTM-000-98a8b7c5-f7d9-11d6-9c08-00b0d020d9fd
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"

This e-Mail may contain proprietary and confidential information and is sent
for the intended recipient(s) only.
If by an addressing or transmission error this mail has been misdirected to
you, you are requested to delete this mail immediately.
You are also hereby notified that any use, any form of reproduction,
dissemination, copying, disclosure, modification,
distribution and/or publication of this e-mail message, contents or its
attachment other than by its intended recipient/s is strictly prohibited.

Visit us at http://www.polaris.co.in

------=_NextPartTM-000-98a8b7c5-f7d9-11d6-9c08-00b0d020d9fd--

[Ilugc] Help: Installation of Video / Sound / Modem Drivers - RH Ver 8.0

Other related posts: