[PCB_FORUM] Re: traces moving with symbols??? Anybody else se e this? Thanks
- From: Jean Bratton <jean.bratton@xxxxxxxxxxxxxx>
- To: Gene Carman <gcarman@xxxxxxxxxxxxxxx>, icu-pcb-forum@xxxxxxxxxxxxx
- Date: Fri, 3 Sep 2004 12:41:21 -0700
Great. One thing - in looking through my notes - if you have any fixed nets,
the parts to which they are attached will still misbehave. You'll have to
unfix the net, rerun the skill program,then you'll be OK.
-----Original Message-----
From: Gene Carman [mailto:gcarman@xxxxxxxxxxxxxxx]
Sent: Friday, September 03, 2004 3:35 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: jean.bratton@xxxxxxxxxxxxxx
Subject: RE: [PCB_FORUM] Re: traces moving with symbols??? Anybody else see
this? Thanks
Thanks... worked beautifully!
-----Original Message-----
From: Jean Bratton [mailto:jean.bratton@xxxxxxxxxxxxxx]
Sent: Friday, September 03, 2004 11:57 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: traces moving with symbols??? Anybody else see
this?
We've seen this in 14.2 designs that stayed in 14.2 too! Attached is
something that was passed around over 2 years ago that seems to solve the
problem in 14.2. Don't know if it will solve your problem or not...
Good luck.
1) Load the attached program, del_cline_prop.il to current directory or
skill path.
2) At Allegro command line, type skill
3) At Allegro command line, type load "del_cline_prop.il" (note: use
space and quotes)
4) At Allegro command line, type exit
5) At Allegro command line, type dprop
-----Original Message-----
From: MAILER-DAEMON@xxxxxxxxxxxxx [mailto:MAILER-DAEMON@xxxxxxxxxxxxx]
Sent: Friday, September 03, 2004 2:54 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] traces moving with symbols??? Anybody else see this?
Have run into an odd situation using 15.1...
Designs that were originally done with 14.2 seem to have "sticky" traces
when moving some parts.
If I move a particular part, the traces (etch) on the top layer move right
with the part as if they were part of the part.
I tried it with the "rip up etch" switch on, with the etch layer off, tried
it with different components... some do and some don't retain the traces.
Seems random, but so far my most dense BGA parts and connectors refuse to
leave their top traces behind... they just break the etch off at the first
via, and along it comes.
Anybody else seeing this? Any possible solutions? Have seen this in a
couple of designs now.
very strange.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
- » [PCB_FORUM] Re: traces moving with symbols??? Anybody else se e this? Thanks
