Thanks Jean I will check it out. Shirley ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jean Louison Sent: Friday, May 05, 2006 12:50 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: mouse change w/15.5 You can use this file: I had "Mentor like" strokes with sted tool. Jean. ----- Original Message ----- From: Bolman, Shirley H <mailto:shirley.h.bolman@xxxxxxxxx> To: icu-pcb-forum@xxxxxxxxxxxxx Sent: Friday, May 05, 2006 9:21 PM Subject: [PCB_FORUM] Re: mouse change w/15.5 In a previous life, I was doing schematic entry in Mentor and learned the "strokes"! Wow they were just great. Once you get used to them they are very powerful. When I started up on Cadence I found they had only a few strokes and most of them didn't work well so I went back to using function keys for the basic things. Of course it doesn't help much that Cadence follows the Select a process then select the thing the process is to affect. Whereas Mentor you select the item, then tell it what process you want to use. One of these days I will train my Cadence tool how to use strokes better but as a librarian there are only a few basic things I need now. Shirley in Oregon ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of lthemanz Sent: Friday, May 05, 2006 1:17 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: mouse change w/15.5 I've seen those strokes performed by Mentor users, and it works really fast. Some of them look like ninja's just stroking their mouse. ----- Original Message ---- From: David Greig <david@xxxxxxxxxxxxxx> To: icu-pcb-forum@xxxxxxxxxxxxx Sent: Saturday, February 18, 2006 1:49:53 AM Subject: [PCB_FORUM] Re: mouse change w/15.5 Hope xyz@xxxxxxxxxx reads my posting when they get back into their office! Best Regards David Greig ______________________________ GigaDyne Ltd Buchan House Carnegie Campus Dunfermline KY11 8PL United Kingdom t: +44 (0)1383 624 975 www.gigadyne.co.uk <http://www.gigadyne.co.uk/> ______________________________ ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman Sent: 17 February 2006 17:15 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: mouse change w/15.5 LOL... the Mentor people think "strokes" are the best thing since sliced bread. Give me configurable keyboard control anyday. -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of David Greig Sent: Friday, February 17, 2006 1:24 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: mouse change w/15.5 env variable, "unset no_dynamic_zoom" why on earth it's even an option? about as much use as strokes. Best Regards David Greig ______________________________ GigaDyne Ltd Buchan House Carnegie Campus Dunfermline KY11 8PL United Kingdom t: +44 (0)1383 624 975 www.gigadyne.co.uk <http://www.gigadyne.co.uk/> ______________________________ ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gary MacIndoe Sent: 16 February 2006 21:34 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] mouse change w/15.5 Hey guys, I'm not sure what's going on with my mouse, or if it's even a result of upgrading to 15.5. Before, while on 15.2, clicking the middle mouse button would continue zooming in if I had just zoomed in. If I had just zoomed out, the middle mouse button would continue the zooming out when clicked. Now, clicking the middle mouse button zooms me in, whether I just zoomed out or in. Not a big deal, but anyone have any clues as to where this is set? Thanks! Gary E. MacIndoe PCB Design Engineer Advanced Micro Devices Longmont, Colorado -- Virus scanned by Lumison. -- Virus scanned by Lumison. ------------------------------------------------------------------------ --------------- Wanadoo vous informe que cet e-mail a ete controle par l'anti-virus mail. Aucun virus connu a ce jour par nos services n'a ete detecte.