[PCB_FORUM] glossing diff pairs

  • From: Kevin McCowan <kmccowan@xxxxxxxxxxxxxx>
  • To: icu-pcb-forum@xxxxxxxxxxxxx
  • Date: Thu, 10 Mar 2005 07:49:57 -0500

Hey all you cadence gurus,
This has been bugging me for some time and I thought
"Ask the group, dummy".
When I gloss the board it seems to have a problem maintaining the diff pair spacing.
I get pairs too close together and even crossing.
Normally I would not allow glossing of diff pairs but
this board has a significant number of them and I
didn't want to leave them out. Otherwise, why gloss?
This is not new either. It seems as though this has
been the behavior as long as I can remember.
Has anyone else seen this and if so, what to do?


15.1 with a relatively new sr installed.

Kevin McCowan
Sr. PCB Designer
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe


To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: