[PCB_FORUM] Re: clines can not be found.
- From: Kevin McCowan <kmccowan@xxxxxxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 27 Apr 2005 08:45:26 -0400
Diane,
Try selecting all of the clines and vias and moving
them 0 (ipick 0) in any direction if the previous idea
doesn't work. If moving them allows you to select them
this should work.
Kevin McCowan
Sr. PCB Designer
TSI Telsys
Dave Elder wrote:
Hi Diane,
I had a similar problem with a Skill routine.
It was solved by clearing the select set. This unsets the find bit.
Try typing "skill axlClearSelSet" in your command window.
Cheers, Dave
Dickoff, Diane J wrote:
I had a crash in my allegro. I ran dbdoctor, updated my drcs, picked
up all the traces and vias and moved 0,0, and rebooted by desktop. But
when I try to delete a via or cline it says there is no element to be
found (and they are selected in the find menu). The only way I can get
it to see the cline is to move it (without stretching etch) and then
delete it---I can’t get anything to delete a via.
Has anyone seen this before and/or do you have any suggestions on how
to fix it?
Thanks, Diane Dickoff
Intel Corporation
Hillsboro, Oregon
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
