[PCB_FORUM] Re: The router...
- From: Tom Robinson <trobinson@xxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Fri, 8 Jul 2005 16:30:50 -0400
Hi Carl:
If someone is autorouting with the current Orcad Layout are they also
autorouting with Spectra?
tr :)
-----Original Message-----
From: Musetti, Carl [mailto:cmusetti@xxxxxxxxxxxxxxx]
Sent: Friday, July 08, 2005 3:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: The router...
These days they are one in the same in the old days allegro used to have its
own router called insight I believe, then Cadence bought Valid which owned
allegro and bolted the PRANCE router onto it, then developed their own
router Prevail which was pretty darn good and canned that and then bought
CCT and bolted the CCT router (Specctra) on it and that was nearly 10 years
ago and they still haven't completely integrated the tool, well at least the
way I would like it integrated. So bottom line here is if you are auto
routing with allegro and you haven't purchased a 3rd party auto router then
you are routing with Specctra.
-----Original Message-----
From: Garrett Gilbertson [mailto:Garrett.Gilbertson@xxxxxxx]
Sent: Friday, July 08, 2005 3:36 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: The router...
I have been curious about the auto routers and confused by why there is an
Allegro router and Specctra router. Can someone tell me the difference or
why there are two?
I probably will just stick to manual routing but they would be fun to know
more about and possibly give a try.
Garrett Gilbertson
Phoenix Design Center
"Bye, Randy W" <Randy.Bye@xxxxxxxxxx>
Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx
07/08/2005 11:14 AM
Please respond to icu-pcb-forum
To: icu-pcb-forum@xxxxxxxxxxxxx
cc:
Subject: [PCB_FORUM] Re: The router...
Tom,
The auto-router built into Allegro is the Specctra router. Many folks
regard it as the best in the business for auto-routing. In addition to
auto-routing it has excellent interactive route editing capability too. I
find that there are some things I like doing with the Specctra route editor
and others with the Allegro route editor.
Regards,
Randy
Randy Bye
PCB Engineering
UNISYS , Imagine it. Done.
PO Box 64942
St. Paul MN. 55164
MS: 4713
Voice (651)635-3998
Fax (651)635-6329
E-mail: randy.bye@xxxxxxxxxx
THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY
MATERIAL and is thus for use only by the intended recipient. If you received
this in error, please contact the sender and delete the e-mail and its
attachments from all computers.
_____
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Tom Robinson
Sent: Friday, July 08, 2005 7:54 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] The router...
Hi George:
The router that is built into Allegro is it a good one? Is it the one they
use in Orcad Layout?
Best regards,
tr :)
This message and any file transmitted with it may contain confidential
information and is exempt from disclosure under applicable law. The
information contained in this message and any file transmitted with it is
transmitted in this form based on a reasonable expectation of privacy. Any
disclosure, distribution, copying or use of the information by anyone other
than the intended recipient, regardless of address or routing, is strictly
prohibited. If you have received this message in error, please advise the
sender by immediate reply and delete the original message. Personal messages
express views solely of the sender and are not attributable to Biodex
Medical Systems, Inc.
This message and any file transmitted with it may contain confidential
information and is exempt from disclosure under applicable law. The
information contained in this message and any file transmitted with it
is transmitted in this form based on a reasonable expectation of
privacy. Any disclosure, distribution, copying or use of the
information by anyone other than the intended recipient, regardless of
address or routing, is strictly prohibited. If you have received this
message in error, please advise the sender by immediate reply and delete
the original message. Personal messages express views solely of the
sender and are not attributable to Biodex Medical Systems, Inc.
Other related posts:
