Thanks Jean, this sounds like it might also work, even for different 45 lengths. Regards, Gary MacIndoe Senior PCB Design Engineer EbD R&D Hardware Surgical Solutions Group Covidien 5920 Longbow Drive M/S A20 Boulder, CO 80301 303.476.7458 www.covidien.com<http://www.covidien.com> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jean LOUISON Sent: Tuesday, August 07, 2012 11:10 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Shape 45s to arcs Hi Gary, Another solution maybe : Add a circular shape, and then merge it with the first one... [cid:image002.jpg@01CD7491.A193CB70] Jean Le 07/08/2012 18:53, JCharles TEYSSIER a écrit : Hi Gary, maybe you can : - decompose shape - make fillet between segments (located in demensiongs dialog box... i have at this time no acces to allegro to explain furter, sorry) - compose shape you are done! Jean-Charles Macindoe, Gary a écrit : Hey guys, I have a bunch of shapes that I created with 45 degree angles, and the DE now wants to round off all of the "corners" (change to arcs). I have been using Edit Boundary to create the arcs, but I'll have to do this in dozens of places. Anybody know of a way to change the 45s to arcs all at once for each shape? Regards, Gary MacIndoe Senior PCB Design Engineer EbD R&D Hardware Surgical Solutions Group Covidien 5920 Longbow Drive M/S A20 Boulder, CO 80301 303.476.7458 www.covidien.com<http://www.covidien.com> <http://www.covidien.com><http://www.covidien.com> ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx<mailto:icu-pcb-forum-request@xxxxxxxxxxxxx> with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx<mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx> -----------------------------------------------------------