Thanks Jean-Charles, I'll give it a try. Regards, Gary MacIndoe Senior PCB Design Engineer EbD R&D Hardware Surgical Solutions Group Covidien 5920 Longbow Drive M/S A20 Boulder, CO 80301 303.476.7458 www.covidien.com -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of JCharles TEYSSIER Sent: Tuesday, August 07, 2012 10:53 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Shape 45s to arcs Hi Gary, maybe you can : - decompose shape - make fillet between segments (located in demensiongs dialog box... i have at this time no acces to allegro to explain furter, sorry) - compose shape you are done! Jean-Charles Macindoe, Gary a écrit : > > Hey guys, > > I have a bunch of shapes that I created with 45 degree angles, and the > DE now wants to round off all of the "corners" (change to arcs). > > I have been using Edit Boundary to create the arcs, but I'll have to > do this in dozens of places. > > Anybody know of a way to change the 45s to arcs all at once for each > shape? > > Regards, > > Gary MacIndoe > > Senior PCB Design Engineer > > EbD R&D Hardware > > Surgical Solutions Group > > Covidien > > 5920 Longbow Drive > > M/S A20 > > Boulder, CO 80301 > > 303.476.7458 > > www.covidien.com <http://www.covidien.com> > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------