[PCB_FORUM] Re: Scripts with Free Viewer
- From: Dave Seymour <dseymour@xxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 9 Jul 2010 07:30:20 -0700
Viewers are backward compatible, 16.3 viewer can view down to 15.x
From the Cadence web site:
Download your FREE Physical Viewer today
* Allegro/SIP/MCM FREE Physical Viewers 16.3 -
18.8MB<https://www.cadence.com/products/pcb/pages/AllegroDownloads.aspx>
Reads designs for versions 15.x to 16.3; runs on Windows
* Allegro FREE Physical Viewer 15.x -
8MB<https://www.cadence.com/products/pcb/pages/AllegroDownloads.aspx>
Reads designs for versions 14.x, 15.0, 15.1 15.2, 15.5, 15.5.1, and 15.7; runs
on Windows 2000 and Windows XP only
* Allegro FREE Physical Viewer v13.5 -
4.26MB<https://www.cadence.com/products/pcb/pages/AllegroDownloads.aspx>
Reads designs for versions 12.x and 13.x; runs on Windows NT only
Dave Seymour
Ixia
919.267.4840
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Friday, July 09, 2010 10:19 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Scripts with Free Viewer
Thanks Dave. We're still using 16.2, but are just about ready to move to 16.3.
Do you know if there's a problem using 16.3 Free Viewer to view a 16.2 design?
Thanks for the reply.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Friday, July 09, 2010 8:12 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Scripts with Free Viewer
16.3 Free Physical Viewer Grids are available:
Setup > Display > Grids
D
Dave Seymour
Ixia
919.267.4840
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma Kemp-Bresett
Sent: Friday, July 09, 2010 10:08 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Scripts with Free Viewer
I always thought the grid settings weren't accessible from the free
viewer.....? I always had to set up the grids BEFORE I sent a board to a person
using only the free viewer but I haven't really used the free viewer much since
16.x so I am just guessing... hope this helps, at least a little bit :-)
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified that
any disclosure, copying, distribution or use of the contents of this document
in any manner is strictly prohibited.
________________________________
From: Macindoe, Gary [mailto:Gary.Macindoe@xxxxxxxxxxxx]
Sent: Thursday, July 08, 2010 6:01 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Scripts with Free Viewer
Hey guys,
My scripts for different views (layers on/off), setting pads filled/unfilled
etc. are working fine in the Free Viewer. But, my scripts for changing the grid
cause the Free Viewer to crash.
Anyone know how to get grid setting scripts to work with the Free Viewer?
TIA!
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R & D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
Other related posts:
