Hi All I'm thinking of using embedded resistors for my next project, by using Ohmega ply material I have never done this in the past, I have read the Design guide from Ohmega, and it seems to be ok What I really want is to have a sample allegro board, or a portion, to show me how it was done. The main use will be for series termination, close to a BGA. If some one could send me a BRD file or just a portion where the embedded resistors are, it would be very helpful. Thanks! Inkra Networks Patrick Jabbaz CID Sr Board Layout Eng. 40971 Encyclopedia Circle Fremont, CA 94538 Work (510) 249-4835 Mobile (408) 621-6533 patrick@xxxxxxxxx