Look in your online documentation under Allegro Design Entry HDL for a document called SCALD to HDL Evolution Guide. Chad ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma Kemp-Bresett Sent: Friday, March 07, 2008 1:00 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: SCALD to Concept HDL migration Hi George, Any idea where to find a migration guide with step by step instructions? Thanks, Dharma KAW/USA Ltd. 39 Simon Street, #4 Nashua, NH 03060 603-886-8711 x212 603-881-8763 fax Confidentiality Notice: This email and any accompanying documents contain information that is confidential, privileged or exempt from disclosure under applicable law and is intended for the exclusive use of the addressee. This information is private and protected by law. If you are not the intended recipient, or have received this email in error, you are hereby notified that any disclosure, copying, distribution or use of the contents of this document in any manner is strictly prohibited. ________________________________ From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of george.h.patrick@xxxxxxxxxxxxx Sent: Friday, March 07, 2008 1:54 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: SCALD to Concept HDL migration This is supported under WinDoze as well. We keep a copy of 13.5 on the system for when this needs to be done (which is pretty rare now). -- George Patrick Tektronix, Inc. Central Engineering, EDS Applications Support P.O. Box 500, M/S 39-512 Beaverton, OR 97077-0001 * 503-627-5272 (voice) * 503-627-5587 (fax) http://www.tektronix.com <http://www.tektronix.com/> http://www.pcb-designer.com <http://www.pcb-designer.com/> "Off-Grid and Proud of it!" -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ritter, Alan Sent: Friday, March 07, 2008 10:40 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: SCALD to Concept HDL migration This was supported under Unix back when the SCALD/HDL transition first occurred at Allegro V13 or so. I'm not sure the utilities to do so were ever migrated to the Wintel platform. It was a big hassle and involved library as well as design conversion. /s/jar (Alan Ritter, alan.ritter@xxxxxxxxxx) http://www.mtritter.org ________________________________ From: Dharma Kemp-Bresett [mailto:dharma@xxxxxxx] Sent: Friday, March 07, 2008 11:23 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] SCALD to Concept HDL migration Hi Everyone, I know that there is a migration guide for bringing a SCALD schematic in to concept HDL but I can't seem to find it! Can anyone forward me the doc or point me in the right direction? Thanks in advance, Dharma KAW/USA Ltd. 39 Simon Street, #4 Nashua, NH 03060 603-886-8711 x212 603-881-8763 fax Confidentiality Notice: This email and any accompanying documents contain information that is confidential, privileged or exempt from disclosure under applicable law and is intended for the exclusive use of the addressee. This information is private and protected by law. If you are not the intended recipient, or have received this email in error, you are hereby notified that any disclosure, copying, distribution or use of the contents of this document in any manner is strictly prohibited. EMAIL DISCLAIMER Please Note: The information contained in this message may be privileged and confidential, protected from disclosure, and/or intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any disclosure, distribution, copying or other dissemination of this communication is strictly prohibited. If you received this communication in error, please immediately reply to the sender, delete the message and destroy all copies of it. Thank You