[PCB_FORUM] Re: Rotate The Board
- From: "Van Os, Richard \(GE Healthcare\)" <Richard.VanOs@xxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 24 May 2006 11:33:24 -0500
That beats turning the monitor.
For the second question you can use a clip file.
_____
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Caldwell
Sent: Wednesday, May 24, 2006 5:59 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: icu-pcb-forum@xxxxxxxxxxxxx; icu-pcb-forum-bounce@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Rotate The Board
Set all to visible
Unfix everything
Select the move command
make sure Find "All On" is checked
make Options Rotation, absolute, angle 180, user pick point
click the right mouse button and select "temp group"
window everything you want to rotate so that it is selected
click the right mouse button and select "complete"
click at a coordinate point
click the right mouse button and select rotate
now place the rotated data
(no guarantees - I'm currently working in Expedition and I am getting
old)
you can change all of your text alignment in one fell swoop with the
'change' command but I don't know how you would copy footprint text from
one design to another
"Gajawada Kanth" <chandupcb@xxxxxxxxx>
Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx
05/24/2006 07:28 AM
Please respond to
icu-pcb-forum@xxxxxxxxxxxxx
To
icu-pcb-forum@xxxxxxxxxxxxx
cc
Subject
[PCB_FORUM] Rotate The Board
Hi All,
I am using SPB 15.2.I have a Condition where I have to Rotate the board
by 180 Degrees is it posssible?
I want to Copy the Assembly text alignment done in one board to other
board is it possible?
--
Chandu
Other related posts:
