[PCB_FORUM] RE : How to display reference designators in hierarchical design
- From: "Jean-Charles TEYSSIER" <jcteyssier@xxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 19 May 2006 06:51:56 +0200
You just have to expand your design before to plot it.
Jean-Charles TEYSSIER
Icra Industrie
-------- Message d'origine--------
De: icu-pcb-forum-bounce@xxxxxxxxxxxxx de la part de Gennadiy Kiryukhin
Date: jeu. 18/05/2006 19:45
À: icu-pcb-forum@xxxxxxxxxxxxx
Objet : [PCB_FORUM] How to display reference designators in hierarchical design
I have a design that was created using hierarchical modules.
How can I print out the schematic with all the reference designators shown?
Thanks,
Gennadiy
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
- » [PCB_FORUM] RE : How to display reference designators in hierarchical design
