[PCB_FORUM] Re: PDF to Allegro
- From: "Weinberg, Richard (Richard)" <rweinberg@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 18 Apr 2005 15:56:34 -0400
My solution does not apply. I can help you with importing a logo, etc.
Good luck. Let us know how it comes out.
Richard Weinberg
Agere Systems
207-846-4539
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Coombs, William
B. (US SSA)
Sent: Monday, April 18, 2005 3:53 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PDF to Allegro
Richard,
Thanks for responding.
I want intelligent metal & body graphics.
My intent is to (hopefully) convert PDF data from a data sheet into a
graphical
component template. Then I would impose this template on top of the
corresponding
footprint in Allegro to verify the footprint.
Bill
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Weinberg,
Richard (Richard)
Sent: Monday, April 18, 2005 3:46 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: PDF to Allegro
I need a clarification. Do you just want a dumb shape or intelligent
metal?
Richard Weinberg
Agere Systems
207-846-4539
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Coombs, William
B. (US SSA)
Sent: Monday, April 18, 2005 3:39 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] PDF to Allegro
Hello all,
Does anyone know of a method to convert PDF data (graphical) to a format
that can be imported by Allegro?
Thanks.
William B. Coombs
Sr. PCB Designer
BAE Systems CNIR
(973)636-7463
Other related posts:
