[PCB_FORUM] Re: ODB++ results

  • From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
  • To: <icu-pcb-forum@xxxxxxxxxxxxx>
  • Date: Fri, 16 Jul 2010 11:37:00 -0400

Thanks for the reply Daniel. It turns out I just wasn't seeing the
"Suppress unconnected pads" check box in the ODB++ Inside form. I do
have some Net_Short properties on pins and vias, so I'll check that area
real good.

 

Thanks again.

 

Regards,

 

Gary MacIndoe

Senior PCB Layout Designer

Contract - Kelly Services

Covidien 

EbD R&D

5920 Longbow Drive

Boulder, CO 80301

 

303.476.7458

www.covidien.com

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Daniel So
Sent: Friday, July 16, 2010 9:03 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: ODB++ results

 

Gary

 

Are they on components that have the "net-short" property? There is a
bug on that. Latest hotfix on rel 16.2 and 16.3 fixes it I believe. I
had that issue.

 

Daniel

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Friday, July 16, 2010 7:45 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] ODB++ results

 

Hey Guys,

 

I just noticed that when I run ODB++, then look at it in the VUV, I get
inner pads where there are no connections, even though I have my inner
films set up to "Suppress unconnected pads".

 

Has anyone seen this behavior? Am I not setting up ODB++ Inside
correctly?

 

Thanks for any help?

 

Regards,

 

Gary MacIndoe

Senior PCB Layout Designer

Contract - Kelly Services

Covidien 

EbD R&D

5920 Longbow Drive

Boulder, CO 80301

 

303.476.7458

www.covidien.com

 

Other related posts: