Thanks to all of you for your responses. It looks like it's pretty safe to just send the ODB++ output to a reputable Fab house. Regards, Gary MacIndoe Senior PCB Layout Designer Contract - Kelly Services Covidien EbD R&D 5920 Longbow Drive Boulder, CO 80301 303.476.7458 www.covidien.com -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Carter Sent: Tuesday, July 27, 2010 7:06 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: ODB++ output (*.tgz) to Fab (no gerbers) The same holds true for Fujitsu Network Communications....we've been supplying ODB++ exclusively to our Fab houses for over a decade. We also use Enterprise 3000 to extract it. We package additional drawings and data into defined directories before the ODB zip file is created (for instance detailed information for routes, v-grooves, counter-bores, etc. where both Allegro and ODB lack specific support). Gary Carter Sr. Manager, Design Automation Fujitsu Network Commuications, Inc. Richardson, Texas (972) 479-2236 Douglas Stanley wrote: > > We have been supplying ODB++ exclusively to our fab houses for close > to 10 years. We do close to 50 designs a month and I don't recall > there ever being a problem that was traced back to a Valor bug - or if > there was, it was very, very long ago. > > However, we read the extracted Allegro database into Valor's > Enterprise tool . We don't use the direct ODB++ output from Allegro. > > > Douglas G. Stanley > PC Board Designer, Principal > Broadcom Corporation <http://www.broadcom.com/> - Irvine, CA > dstanley@xxxxxxxxxxxx > (949) 926-5889 > > *From:* icu-pcb-forum-bounce@xxxxxxxxxxxxx > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] *On Behalf Of *Macindoe, Gary > *Sent:* Monday, July 26, 2010 3:27 PM > *To:* icu-pcb-forum@xxxxxxxxxxxxx > *Subject:* [PCB_FORUM] ODB++ output (*.tgz) to Fab (no gerbers) > > Hey guys, > > Has anyone been supplying only the *.tgz file (instead of gerbers, > drill, ipc etc.) to the Fab house? > > If you have, have you run into any issues (besides a Fab house unable > or unwilling to use only the *.tgz file)? > > Thanks for any input. > > Regards, > > * * > > *Gary MacIndoe* > > Senior PCB Layout Designer > > Contract - Kelly Services > > Covidien > > EbD R&D > > 5920 Longbow Drive > > Boulder, CO 80301 > > 303.476.7458 > > www.covidien.com > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------