Hi Jim Goshorn Pls check the NO DRC property (pin properties).
Sol: 1.Edit. 2.properties. 3.filter only on pins. 4.select Npth pin.
Thanks Kesavan
I am beginning to see traces to NPTH that are not being flagged as DRC's until the
trace violates the setting for line to pad.
As we have designed most of our NPTH padstacks, pad size well under the drill hole size
we have found only through a visual inspection that we are encroaching the drilled area.
Is there a parameter that needs to be set that I have over looked ?
Thanks Jim
Jim Goshorn MCL, Inc 501 S Woodcreek Rd Bolingbrook, IL 60440 630-771-7205
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------
-----------------------------------------Disclaimer-------------------------------------------------------
----------------------------------------------------------------------------------------------------------
To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------