[PCB_FORUM] Re: Netlist from Orcad(cadence)
- From: "Khurana, Varun" <vkhurana@xxxxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 25 Jan 2012 19:45:40 +0000
Save the design in 16.2 format – that should work.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
Shahed.Safavi-Bayat@xxxxxxxxxxxxxxxxxxxxx
Sent: Wednesday, January 25, 2012 11:32 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: icu-pcb-forum@xxxxxxxxxxxxx; icu-pcb-forum-bounce@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Netlist from Orcad(cadence)
Unfortunately Power net is not working with 16.xx.
Shahed
From:
"Khurana, Varun" <vkhurana@xxxxxxxxxxxx<mailto:vkhurana@xxxxxxxxxxxx>>
To:
"icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>"
<icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>>
Date:
01/25/2012 02:27 PM
Subject:
[PCB_FORUM] Re: Netlist from Orcad(cadence)
________________________________
You can pass attributes too using the PowerNET netlister – details are at
http://pcbstandards.com/forums/showthread.php?p=8612
Varun
From:
icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx>
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
Shahed.Safavi-Bayat@xxxxxxxxxxxxxxxxxxxxx<mailto:Shahed.Safavi-Bayat@xxxxxxxxxxxxxxxxxxxxx>
Sent: Wednesday, January 25, 2012 8:53 AM
To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
Subject: [PCB_FORUM] Re: Netlist from Orcad(cadence)
Sam,
As already was pointed out by another member OrCAD can out put .asc file but
the net list that OrCAD generate is void of any attributes from
schematic. Also footprint names should be same as their PADS footprints
library. To do this go to net list dialog box and select other and in their you
have
two netlister for PADS.
Good Luck!
Shahed
From:
sjchar3@xxxxxxxxxxxx<mailto:sjchar3@xxxxxxxxxxxx>
To:
icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
Date:
01/25/2012 11:21 AM
Subject:
[PCB_FORUM] Re: Netlist from Orcad(cadence)
________________________________
Group:
The other group requested all our Cadence files for a particular board.
They use PADs and requested a netlist file.
I know orcad creates .dat files, I'm asking can these files be used to create
a .pcb file?
Is the DSN file sufficient?
I don't much about PADs, hopefully someone here can help. We have Cadence, they
have PADs.
Thanks again,
Sam
-----Original Message-----
From: David Price <davidp@xxxxxxxxxxxxxx<mailto:davidp@xxxxxxxxxxxxxx>>
To: icu-pcb-forum
<icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>>
Sent: Wed, Jan 25, 2012 8:33 am
Subject: [PCB_FORUM] Re: Netlist from Orcad(cadence)
Yes, Capture formatted netlist can be used as a schemaic frontend to PADs.
Capture is often the schematic preferred choice for PADs users.
David
At 10:05 AM 1/25/2012, you wrote:
Group, Can I use the netlist from Orcad and import into pads?
I'm using Cadence 16.3 and our other site is using Mentor's PADs.
Thanks,
Sam
________________________________
NOTICE
If you are not the intended recipient, please contact the sender by reply
e-mail and destroy the original message and any copy of the message as well as
any attachment to the original message. This e-mail message and any attachment
are for the sole use of the intended recipients and may contain proprietary
and/or confidential information which may be privileged or otherwise protected
from disclosure. Any unauthorized review, use, disclosure or distribution is
prohibited without prior authorization by SAFRAN-ELECTRONICS CANADA. An e-mail
response to this address may be subject to interception or monitoring for
operational reasons or for lawful business practices. SAFRAN-ELECTRONICS CANADA
shall not therefore be liable in any way for the message if modified, altered
or falsified.
Safran-Electronics Canada
(formerly Hispano-Suiza Canada)
www.Safran-Electronics.ca<http://www.safran-electronics.ca/>
________________________________
NOTICE
If you are not the intended recipient, please contact the sender by reply
e-mail and destroy the original message and any copy of the message as well as
any attachment to the original message. This e-mail message and any attachment
are for the sole use of the intended recipients and may contain proprietary
and/or confidential information which may be privileged or otherwise protected
from disclosure. Any unauthorized review, use, disclosure or distribution is
prohibited without prior authorization by SAFRAN-ELECTRONICS CANADA. An e-mail
response to this address may be subject to interception or monitoring for
operational reasons or for lawful business practices. SAFRAN-ELECTRONICS CANADA
shall not therefore be liable in any way for the message if modified, altered
or falsified.
Safran-Electronics Canada
(formerly Hispano-Suiza Canada)
www.Safran-Electronics.ca<http://www.safran-electronics.ca/>
Other related posts:
