[PCB_FORUM] Re: Import/Export text blocks
- From: "Joe.witten" <joe.witten@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 22 Aug 2008 13:19:27 -0700
It looks like ctrl P captures all the settings and creates .scr that you can
read back in to other boards. If the control board has 16 entries and the
receiving board has 20, only the 16 entries will change.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Schaefer
Sent: Tuesday, July 22, 2008 11:46 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Import/Export text blocks
So you are recording a script while setting all of the text parameters in 1
design, then running on others? (I assume parameters that are not edited do
not get captured in the script)
>
> From: "Joe.witten" <joe.witten@xxxxxxxxxxx>
> Date: 2008/07/22 Tue PM 12:33:45 CDT
> To: <icu-pcb-forum@xxxxxxxxxxxxx>
> Subject: [PCB_FORUM] Re: Import/Export text blocks
>
> This is it! Thank you!
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jean-Charles
> TEYSSIER
> Sent: Tuesday, July 22, 2008 9:53 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Import/Export text blocks
>
>
> Joe:
>
> Open 'Text Setup' then type ctrl P: this will open a box where you can
> record a script.
> Not shure this work (i remind i have to creat my own script many years
> ago with a text editor).
> Jean-Charles
>
> Joe.witten a écrit :
> > Thanks Dave, but I was thinking there was a simple way of saving the
> setting
> > by opening the 'Text Setup' window then typing a command that would
create
> a
> > file you could read in to another board. I don't think there was any
> skill
> > involved. Maybe I am dreaming this up... I thought it was about a year
> ago
> > I'll give your method a try.
> >
> >
> >
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Elder
> > Sent: Monday, July 21, 2008 8:03 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Import/Export text blocks
> >
> >
> >
>
http://www.cdnusers.org/Forums/tabid/52/forumid/77/tpage/1/view/topic/postid
> > /5617/Default.aspx#8087
> >
> > Joe.witten wrote, On 22/07/2008 11:49 a.m.:
> >
> >> I seem to remember a post where some explained how to export the list
of
> >> Allegro text blocks from one design and import them back into another.
> >>
> > I've
> >
> >> searched through the archives, but I can't find the thread. Can
someone
> >> repost this or point me to it?
> >>
> >> Thanks,
> >> Joe
> >>
> >> -----------------------------------------------------------
> >> To subscribe/unsubscribe:
> >> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >> with a subject of subscribe or unsubscribe
> >>
> >> To view the archives of this list go to
> >>
> > //www.freelists.org/archives/icu-pcb-forum/
> >
> >> Problems or Questions:
> >> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >> -----------------------------------------------------------
> >>
> >>
> >>
> >
> > =======================================================================
> > This email, including any attachments, is only for the intended
> > addressee. It is subject to copyright, is confidential and may be
> > the subject of legal or other privilege, none of which is waived or
> > lost by reason of this transmission.
> > If the receiver is not the intended addressee, please accept our
> > apologies, notify us by return, delete all copies and perform no
> > other act on the email.
> > Unfortunately, we cannot warrant that the email has not been
> > altered or corrupted during transmission.
> > =======================================================================
> >
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> >
> >
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
Dave Schaefer
dave.schaefer@xxxxxxx
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
