Tony,
I think that the our customer oursourced to a company that used
PADS. Now they are running Allegro and I dont' think they have access
to PADS either. I will ask the Engineer to see if they have anyone in
the company working with PADS. Thank you for the ideas.
Thank
you,
From: "Cosentino, Tony" <Tony.Cosentino@xxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: <icu-pcb-forum@xxxxxxxxxxxxx>
Subject: [PCB_FORUM] Re: Extracting symbol from PADs then into Allegro
Date: Tue, 15 May 2007 11:53:27 -0500
Seiji,You could ask if you can get the database in ASCII format. Is that am option?Tony Cosentino
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Tuesday, May 15, 2007 11:44 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Extracting symbol from PADs then into Allegro----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------Hi Shiva,
The evaluation program does not allow me to use the File/Export command. I think that there is no way to get around this :(
Please let me know if there are other options.
Thank you
From: shiva shiva <shiva_insys@xxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Extracting symbol from PADs then into Allegro
Date: Tue, 15 May 2007 02:55:36 +0100 (BST)
Hi seiji
Place all the cmponents using eco in pads and then export to ascii format and now u can import that into allegro and do export libraries. hope this helps.
Regards
shiva.
"Cosentino, Tony" <Tony.Cosentino@xxxxxxxxxxx> wrote:Seiji,Is the PADS database in binary or ASCII? If it is ASCII then you can read the database into Cadence Allegro and then extract the library fromthat. If it is binary then I think you are out of luck.ThanksTony CosentinoTekelec Hardware Engineer919-460-3656
PM
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Monday, May 14, 2007 2:28
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Extracting symbol from PADs then into Allegro
----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------Hi all,I recently received a PADS board with a symbol I would like to extract if it's possible. The customer does not have a datasheet for this part for some reason and wants me to extract the data from the PADs board. We do not have PADS and I have downloaded the evaluation from Mentor. Is it possible to export this library and import into allegro format or does anyone have a better suggestion?Any help would be appreciated.
Thank you in advance.Seiji
Here痴 a new way to find what you're looking for - Yahoo! Answers