[PCB_FORUM] Re: Editable text on symbols
- From: "Carrow, Dennis" <dcarrow@xxxxxxxxxx>
- To: "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 30 Sep 2009 14:29:13 -0500
Yes, that's what I wanted! Thanks Jerry!
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jerry Grzenia
Sent: Wednesday, September 30, 2009 9:56 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Editable text on symbols
Sure - You could add a property called "Title" with an initial value "DESIGN
NAME HERE".
The designers could then change this Title property value to the actual design
name.
Or - you could use Custom Text properties.
Jerry
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Carrow, Dennis
Sent: Wednesday, September 30, 2009 9:07 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Editable text on symbols
Hello All,
How do I place text on my title block symbol that is editable after placing it
on a schematic page? I would like to add under Title "DESIGN NAME HERE". Is
this possible? Thanks! -DC (Allegro Design Entry HDL 16.2)
Other related posts:
