[PCB_FORUM] Re: ECL report in Allegro V15.2
- From: "Schwartz, Jerome" <jschwa01@xxxxxxxxxx>
- To: "'icu-pcb-forum@xxxxxxxxxxxxx'" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 23 Mar 2005 11:49:16 -0500
Gary,
It only works in a shell tool for me. Not in Allegro.
jerry
-----Original Message-----
From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx]
Sent: Wednesday, March 23, 2005 11:08 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: ECL report in Allegro V15.2
Jerry,
Hmmm... I can set "allegro_old_report" under Misc. in User Preferences, and all
it does is set the reports to text based, not HTML. It has nothing to do with
the selection of reports.
The problem is not being able to run the old "ecl short" report.
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
-----Original Message-----
From: Schwartz, Jerome [mailto:jschwa01@xxxxxxxxxx]
Sent: Wednesday, March 23, 2005 8:44 AM
To: 'icu-pcb-forum@xxxxxxxxxxxxx'
Subject: [PCB_FORUM] Re: ECL report in Allegro V15.2
Gary,
On a UNIX platform I set the variable ALLEGRO_OLD_REPORT to run the old
style
reports in a shell tool. The ECL, long and short, reports are still there.
Regards,
Jerry Schwartz, CID+
IPC Advanced Certified Designer
"May The Schwartz Be With You."
Designer 3
Harris Corporation GCSD Voice (321)-727-5474
P.O. Box 37, MS 1/3232 Pager (321)-690-9797
Melbourne, FL 32902-0037
mailto:Jerome.Schwartz@xxxxxxxxxx <mailto:Jerome.Schwartz@xxxxxxxxxx>
http://www.harris.com <http://www.harris.com/>
-----Original Message-----
From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx]
Sent: Wednesday, March 23, 2005 10:32 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: ECL report in Allegro V15.2
Kesavan,
Wow, I have used this method for years to compare the lengths of selected nets
(put "ecl" property on nets to compare, then just run the "ecl short" (or "ecl
long") report)).
It looks like you can still put the "ecl" property on a net, but there are no
ecl (short or long) reports available to run. Looks like maybe they are forcing
us to use CM.
They now have the report "Etch Length by Net Report", which lists all nets. It
is in alpha/numeric order of net name, not listed by net length.
Maybe someone out there knows how to do it on 15.2. Good luck!
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
-----Original Message-----
From: Kesavan [mailto:Kesavan@xxxxxxxx]
Sent: Wednesday, March 23, 2005 12:35 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] ECL report in Allegro V15.2
HI everyone,
Please tell me how can I generate ECL report in Allegro ver 15.2, as
we did in Allegro ver 14.2. I used this property to check NET
LENGTHS without using any EXCEL PROCESS and even without knowing the
name of particular NETS in 14.2.
How can I generate ECL report in Allegro ver 15.2.
Now what is the use ECL property.
Thanks in Advance.
Kesavan.T
-----------------------------------------Disclaimer-----------------------------
--------------------------
This document is intended for transmission to the named recipient only.If you
are not that
person, you should note that legal rights reside in this document and your are
not authorized
to access, read, disclose, copy, use or otherwise deal with it and any such
actions are prohibited
and may be unlawful.The views expressed in this document are not necessarily
those of HCL Peripherals
Notice is hereby given that no representation, contract or other binding
obligation shall be created
by this e-mail, which must be interpreted accordingly.Any representations,
contractual rights or
obligations shall be separately communicated in writing and signed in the
original by a duly authorized
officer of the relevant company.
--------------------------------------------------------------------------------
--------------------------
Other related posts:
