[PCB_FORUM] Re: DxDesigner to Allegro...
- From: "richard moffat" <richard.moffat@xxxxxxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 27 Oct 2005 09:02:53 +1300
No, not right. Allegro can import any type of attribute/property to Allegro
from DxDesigner. We do it all the time, including ones we make up. The cfg
file needs to be set up correctly to do this.
Some users have developed their own cross probing tools, but they are also
reluctant to share it freely due to the fact it will give competitive companies
a significant productivity increase. You can't give everything out for free -
that's life.
Cheers,
Richard
>>> claude.meyers@xxxxxxxxxxxxxx 27/10/2005 8:25 a.m. >>>
This issue is not DxDesigner issue. The issue is Cadence's "third party
netlist in" it will only pass certain attributes to Allegro. The spec.
Section 7 of the Allegro users Guide hasn't changed as long as I've been
using Allegro. The only way around the cross probing that I know is a
product from OHIO Design Automation.
Claude Meyers
Gennext
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Wednesday, October 26, 2005 11:30 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: DxDesigner to Allegro...
For those of you interested, here are the questions I asked Mentor, and
the
answers they gave me:
Q: Is there a datasheet available for the DxDesigner to Allegro
interface?
A: No, we do not have a datasheet for this option.
Could you please get these questions answered about this interface as
well:
1) Does it support crossprobing
A: No.
2) Does it support decal preview
A: No.
3) Can you use the DxDesigner Attributes Manager for entering/modifying
constraints
A: Yes.
4) What attributes does it pass to Allegro
A: We don't have a list of the constraints/attributes. However, we
have
many customers using DxDesigner very successfully with Allegro.
Keep in mind, they charge $2500 for this, and it appears it does little
more
than produce a netlist. Something that can be done by converting the
PADS
output...
Regards,
Austin
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesyn Research Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesyn Research.
Other related posts:
