[PCB_FORUM] Re: Dummy Nets
- From: "Gerry Meier" <gerry.meier@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 15 May 2006 15:05:56 -0700
set filter to nets > type dummy
Gerry Meier
Sr. PCB Designer
Freedom CAD Services, Inc.
Voice: (603) 864-1300 x1350
AL Voice: (256) 417-6944
Email: gerry.meier@xxxxxxxxxxxxxx
Visit us at www.freedomcad.com <http://www.freedomcad.com/>
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman
Sent: Monday, May 15, 2006 3:24 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Dummy Nets
Hightlight all the nets, and then dehighlight all the named nets...
those remaining highlighted are dummy nets.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Peter Hughes
Sent: Thursday, May 11, 2006 7:03 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Dummy Nets
Ed,
If I want to see dummy nets I do the opposite and highlight all
named nets. The dummy nets will not highlight.
Rgrds
Peter Hughes,
PCB Designer,
Concurrent Technologies,
4 Gilberd Close,
Newcomen Way,
Colchester,
Essex,
CO4 4WN.
Tel: +44 1206 752626
Fax: +44 1206 751116
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Caldwell
Sent: 11 May 2006 14:57
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Dummy Nets
Allegro 15.2 - Is it possible to select/highlight all "Dummy
Nets" at once?
Thanks in advance,
Ed
Other related posts:
