[PCB_FORUM] Re: Dummy Nets
- From: Ed Caldwell <Ed.Caldwell@xxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Thu, 11 May 2006 10:09:01 -0400
Thanks - I was typing "Dummy Net" as it appeared in the command window -
interesting that the other nets do not have the word Net when selected at
the command line. Another good reason to keep this forum!
"Jean Bratton" <jean.bratton@xxxxxxxxxxxxxx>
Sent by: icu-pcb-forum-bounce@xxxxxxxxxxxxx
05/11/2006 10:00 AM
Please respond to
icu-pcb-forum@xxxxxxxxxxxxx
To
<icu-pcb-forum@xxxxxxxxxxxxx>
cc
Subject
[PCB_FORUM] Re: Dummy Nets
Go to the command, go to the find filter, select only âNetsâ and at the
bottom make sure under Find By Name you have Net and Name chosen, they
type dummy in the box under that.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Caldwell
Sent: Thursday, May 11, 2006 9:57 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Dummy Nets
Allegro 15.2 - Is it possible to select/highlight all "Dummy Nets" at
once?
Thanks in advance,
Ed
This correspondence and any attachments are considered confidential. If
you are not the intended recipient, please notify Freedom CAD Services,
Inc. immediately by either replying to this message or by sending an email
to operations@xxxxxxxxxxxxxx; please destroy all copies of this message
and any attachments. Thank you.
Other related posts:
