[PCB_FORUM] Re: Dual Monitor Setup

  • From: "Schwartz, Jerome" <jschwa01@xxxxxxxxxx>
  • To: <icu-pcb-forum@xxxxxxxxxxxxx>
  • Date: Wed, 21 Jul 2010 10:08:33 -0400

On a UNIX system it's the allegro.geo file created by allegro in your pcbenv 
directory.

 

Jerry 


 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Wednesday, July 21, 2010 10:05 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Dual Monitor Setup

 

I can't figure out the pattern of when it opens up on a particular monitor.

 

The "hitting the X" after enlarging to full screen did not work on my set up.

 

However, bringing allegro to the right monitor, as a minimum screen (opened 
allegro, but not full screen), and then "hitting the X" and shutting down; Did 
produce the desired effect.

 

The next time I opened Allegro, it opened on the right screen.

 

This tells me that somewhere in the system there is a file that dictates where 
Allegro will open.

 

I'm just curious if that file could be controlled in a script when opening up 
Allegro to always have it open on the right monitor.

 

Thanks for the tips.

Dave

 

 

 

 

 

Dave Seymour

Ixia

www.ixiacom.com

919.267.4840

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of TEYSSIER Jean-Charles
Sent: Wednesday, July 21, 2010 9:57 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Dual Monitor Setup

 

Why full size ???

 

Jean-Charles TEYSSIER 

Responsable d'affaire

Adeneo 

Adetel Group

2, chemin du Ruisseau 
69134 ECULLY - FRANCE
Tél:+33(0)4 26 49 04 09-Fax:+33(0)4 72 86 05 39

www.adetelgroup.com <http://www.adetelgroup.com/>    

P Before printing, think about ENVIRONMENTAL responsibility!

________________________________

De : icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] De la part de Carrow, Dennis
Envoyé : mercredi 21 juillet 2010 15:55
À : 'icu-pcb-forum@xxxxxxxxxxxxx'
Objet : [PCB_FORUM] Re: Dual Monitor Setup

 

Open allegro, move the screen shot to the monitor you wish it to open on, 
enlarge screen shot to full size, and exit the program by hitting the X in the 
upper right of the screen.  Next time you open the program it will be on that 
monitor.

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Reade, Sue
Sent: Wednesday, July 21, 2010 8:48 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Dual Monitor Setup

 

It seems to always open up where I closed it last. I'm not sure that there is 
anything for a specific application that would direct it to a specific monitor.

 

Sue Reade
CAD Engineer, Hardware Engineering, NSG

(o) +1.919.461-1047  |  (m) +1.919.819-8092

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Wednesday, July 21, 2010 9:44 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Dual Monitor Setup

 

Hey Everybody,

 

I got a dual monitor set up for Allegro.

 

I would like Allegro to always open on the right monitor, the left being my 
main monitor.

 

What controls which monitor Allegro opens on?

 

Thanks

Dave

 

 

Dave Seymour

Ixia

www.ixiacom.com

919.267.4840

________________________________

Other related posts:

  1. Home
  2. icu-pcb-forum
  3. Archive
  4. 07-2010