Peter, I'll second Gerry's approach. Glossing, with nothing else checked except removing dangling lines, works for me. In only limited instances do I have to go back and look at the log file for further cleanup. Andrew Noonan Sr. PCB Designer Topspin Communications (w)650-316-3398 (c)650-814-3677 -----Original Message----- From: Gerry Meier [mailto:gerry.meier@xxxxxxxxxxxxxx] Sent: Tuesday, March 29, 2005 6:03 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Dangling find updates Peter, In V15.2 I use Gloss to remove dangling lines (only have remove dangling lines checked nothing "else at all") This will usually get 98 -100% of any dangling lines on my boards. It will not remove those not on a net. I then use the Report > Dangling Line Report. This has links to the dangling lines that are left. I first zoom in to a small area, set my layer and then click on the link and it takes you the the co-ordinates. . regards, Gerry Gerry Meier Sr. PCB Designer Freedom CAD Services, Inc. Voice: (603) 864-1300 x1350 Alt. Voice: (386) 753-0048 Email: gerry.meier@xxxxxxxxxxxxxx visit our website at<http://www.freedomcad.com <http://www.freedomcad.com/> _____ From: Mike Golding [mailto:Mike.Golding@xxxxxxxxxx] Sent: Tuesday, March 29, 2005 8:47 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Dangling find updates This message is on behalf of Peter Sørensen. He is unable to send to freelists right now. -------------------------------------------------------------------------------------------------------------------------------------------- Does anyone have an updated skill program that can find all dangling lines in Allegro 15.2? Does anyone have a version that will delete all dangling lines in one operation? I have mouse arm problems and try to avoid doing some thousens of mouseclick. I acn read freelist.org, but can't send to it at present. Thanks in advance sorensen@xxxxxxxxxxx Peter Sørensen