[PCB_FORUM] Re: Converting .GDS Files from Cadence Virtuoso to Al legro .DRA
- From: george.h.patrick@xxxxxxxxxxxxxx
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Fri, 4 Mar 2005 15:28:12 -0800
I have heard (but not personally seen) that the flow for this is supposed to
be IC tool > APD > Allegro. Do you have an APD license?
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587 <http://www.tektronix.com/>
http://www.tektronix.com <http://www.pcb-designer.com/>
http://www.pcb-designer.com
It's my opinion, not Tektronix'
-----Original Message-----
From: Scott, Ron [mailto:rg-scott@xxxxxx]
Sent: Friday, March 04, 2005 14:26
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Converting .GDS Files from Cadence Virtuoso to Allegro
.DRA
Importance: High
All,
Here's a little something for a Friday. I need to convert a file from the
IC layout tool to a physical part in Allegro. I can attempt to import the
streaming file but Allegro wants to make it .brd file. The positioning is
extremely important because this is what is called a bump die which has no
leads and connects directly to the IC's substrate. I know this can be done
because I have a few examples but the original source is not available. Any
help will be great.
Regards,
Ron Scott C.I.D.
Texas Instruments
Tel: 214.567.4715
Cell: 972.816.7978
rg-scott@xxxxxx
Other related posts:
- » [PCB_FORUM] Re: Converting .GDS Files from Cadence Virtuoso to Al legro .DRA
