Not a problem, I'm glad it works. And thanks for the feedback. Sometimes people never let the group know if something was successful or not, so it is appreciated. >>> seiji arimitsu <arimitsus@xxxxxxxxxxx> 19/12/2008 9:07 a.m. >>> Hello All, Just for update I got it to work. I set the single pins section to 4 8 and left the rest blank. Thank you guys for your help. NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------