[PCB_FORUM] Re: Allegro 15.7 duplicate vias
- From: Dave Schaefer <dave.schaefer@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 9 Jul 2010 9:32:17 -0500
I also find the content of this list more valuable.
Most all postings to this forum involve more complicated issues and I do learn
from the replies.
>
> From: Dave Seymour <dseymour@xxxxxxxxxxx>
> Date: 2010/07/09 Fri AM 08:57:55 CDT
> To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
> Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
>
> I would like to agree also.
>
> Dave
>
>
> Dave Seymour
> Ixia
> 919.267.4840
> ________________________________
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Thursday, July 08, 2010 7:05 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
>
> Double Ditto!
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Macindoe, Gary
> Sent: Thursday, July 08, 2010 4:39 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
> > I too like this forum better than the cadence one. faster, leaner and most
> > of the time i get an answer.
>
> Ditto, I think there's enough of us to keep it alive.
>
> Regards,
>
> Gary MacIndoe
> Senior PCB Layout Designer
> Contract - Kelly Services
> Covidien
> EbD R & D
> 5920 Longbow Drive
> Boulder, CO 80301
>
> 303.476.7458
> www.covidien.com
>
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
> Sent: Thursday, July 08, 2010 2:16 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
>
> 16.3 does via removals.
>
> I too like this forum better than the cadence one. faster, leaner and most of
> the time i get an answer.
>
>
>
> sam
>
> -----Original Message-----
> From: Macindoe, Gary <Gary.Macindoe@xxxxxxxxxxxx>
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Sent: Thu, Jul 8, 2010 10:14 am
> Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
>
> Les,
>
>
>
> Maybe the Dangling Lines Report (Tools -> Reports) will give you the
> information
>
> you need.
>
>
>
> Like Joe said, if there are two vias in the same location, you should get a
> DRC
>
> error.
>
>
>
> Regards,
>
>
>
> Gary MacIndoe
>
> Senior PCB Layout Designer
>
> Contract - Kelly Services
>
> Covidien
>
> EbD R & D
>
> 5920 Longbow Drive
>
> Boulder, CO 80301
>
>
>
> 303.476.7458
>
> www.covidien.com<http://www.covidien.com/>
>
>
>
> -----Original Message-----
>
> From:
> icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx>
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx?>]
>
> On Behalf Of Les Wong
>
> Sent: Thursday, July 08, 2010 9:17 AM
>
> To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
>
> Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
>
>
>
> Jean-Charles
>
>
>
> I looked in the dbdoctor.log file but did not see any duplicate via messages ?
>
> Les
>
>
>
>
>
> --- On Thu, 7/8/10, JCharles TEYSSIER
> <jeancharles.teyssier@xxxxxxx<mailto:jeancharles.teyssier@xxxxxxx>> wrote:
>
>
>
> > From: JCharles TEYSSIER
> > <jeancharles.teyssier@xxxxxxx<mailto:jeancharles.teyssier@xxxxxxx>>
>
> > Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
>
> > To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
>
> > Date: Thursday, July 8, 2010, 2:22 AM
>
> > Dave,
>
> >
>
> > i am also on cadence's community BUT _i_ considere this
>
> > "forum" more easyer to use each day...
>
> >
>
> > I have respond to somebody on cadence's community; this
>
> > person rspond and when i try to respond ... the web site
>
> > does nor allow me to...(internal error)
>
> > I think i would retry later... this is not first time i
>
> > have problems with cadence's site
>
> >
>
> > Emails NEVER fails; cadence's web site does.
>
> > And it bory me with log-in each time!
>
> >
>
> > THIS place is much more easier. When cadence's community
>
> > site will be much more userfreindly (less flash animations,
>
> > more reliebality) it will be a real good place
>
> >
>
> > Les,
>
> >
>
> > dbdoctor generates a log file: you can find in it the
>
> > coordonates of duplicated vias so you can remove them
>
> > manually.
>
> >
>
> > Jean-Charles
>
> >
>
> > Les Wong a écrit :
>
> > > Hi Dave
>
> > > Thanks,
>
> > > Les
>
> > >
>
> > > --- On *Wed, 7/7/10, David Elder
> > > /<dave.elder@xxxxxxxxxxxxx<mailto:dave.elder@xxxxxxxxxxxxx>>/*
>
> > wrote:
>
> > >
>
> > >
>
> > > From: David Elder
> > > <dave.elder@xxxxxxxxxxxxx<mailto:dave.elder@xxxxxxxxxxxxx>>
>
> > > Subject: Re: [PCB_FORUM]
>
> > Allegro 15.7 duplicate vias
>
> > > To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
>
> > > Date: Wednesday, July 7, 2010,
>
> > 2:42 PM
>
> > >
>
> > > Hi Les,
>
> > > This forum doesn't
>
> > get much use any more. You might want to
>
> > > consider moving over to the
>
> > cadence community forum -
>
> > > http://www.cadence.com/community/forums/27.aspx
>
> > > Anyway - attached is
>
> > some code that identifies duplicate hits on
>
> > > holes and vias.
>
> > > Regards,
>
> > > Dave
>
> > >
>
> > > Dave Elder
>
> > > PCB Design Manager
>
> > > Tait Radio Communications
>
> > > 535 Wairakei Rd, PO Box 1645,
>
> > Christchurch
>
> > > DDI: +64 3 358-0327
>
> > > Mobile: +64 21 373725
>
> > > www.taitradio.com<http://www.taitradio.com/>
> > > <http://www.taitradio.com<http://www.taitradio.com/>>
>
> > > dave.elder@xxxxxxxxxxxxx<mailto:dave.elder@xxxxxxxxxxxxx>
>
> > </mc/compose?to=dave.elder@xxxxxxxxxxxxx<mailto:dave.elder@xxxxxxxxxxxxx>>
>
> > > TAIT: THE RIGHT FIT
>
> > >
>
> > >
>
> > > On 8 July 2010 06:10, Les Wong
>
> > <maveric0@xxxxxxxxxxx<mailto:maveric0@xxxxxxxxxxx>
>
> > > </mc/compose?to=maveric0@xxxxxxxxxxx<mailto:maveric0@xxxxxxxxxxx>>>
>
> > wrote:
>
> > >
>
> > > Hi All
>
> > >
>
> > > Dbcheck used to
>
> > removed duplicate vias, dbdoctor does not do
>
> > > this any more.
>
> > > How is everyone
>
> > dectecting and removing duplicate vias ?
>
> > >
>
> > > Thanks,
>
> > > Les
>
> > >
>
> > >
>
> > -----------------------------------------------------------
>
> > To subscribe/unsubscribe: Send a message to
> > icu-pcb-forum-request@xxxxxxxxxxxxx<mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
>
> > with a subject of subscribe or unsubscribe
>
> >
>
> > To view the archives of this list go to
> > //www.freelists.org/archives/icu-pcb-forum/
>
> >
>
> > Problems or Questions:
>
> > Send an email to
> > icu-pcb-forum-admins@xxxxxxxxxxxxx<mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
>
> > -----------------------------------------------------------
>
> >
>
> -----------------------------------------------------------
>
> To subscribe/unsubscribe:
>
> Send a message to
> icu-pcb-forum-request@xxxxxxxxxxxxx<mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
>
> with a subject of subscribe or unsubscribe
>
>
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
>
>
> Problems or Questions:
>
> Send an email to
> icu-pcb-forum-admins@xxxxxxxxxxxxx<mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
>
> -----------------------------------------------------------
>
> -----------------------------------------------------------
>
> To subscribe/unsubscribe:
>
> Send a message to
> icu-pcb-forum-request@xxxxxxxxxxxxx<mailto:icu-pcb-forum-request@xxxxxxxxxxxxx>
>
> with a subject of subscribe or unsubscribe
>
>
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
>
>
> Problems or Questions:
>
> Send an email to
> icu-pcb-forum-admins@xxxxxxxxxxxxx<mailto:icu-pcb-forum-admins@xxxxxxxxxxxxx>
>
> -----------------------------------------------------------
>
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
