[PCB_FORUM] Re: Allegro 15.2 so59- Via Issue
- From: "Scott, Ron" <rg-scott@xxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 16 Mar 2005 08:16:41 -0600
All,
Please let Uri & Andy handle this outside the forum. Everyone has an
opinion but let's limit those suggestions to constructive dialog.
Meanwhile, who has the next great fix?
Regards,
Ron Scott C.I.D.
Texas Instruments
Tel: 214.567.4715
Cell: 972.816.7978
rg-scott@xxxxxx
_____
From: Carrow, Dennis P. [mailto:Dennis.Carrow@xxxxxxx]
Sent: Wednesday, March 16, 2005 08:10
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro 15.2 so59- Via Issue
But we don't gain monetarily by our suggestions.
_____
From: Uri Chaplianka [mailto:urich@xxxxxxxxxx]
Sent: Wednesday, March 16, 2005 7:42 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro 15.2 so59- Via Issue
It not advertising but suggesting like " this way". When one user ask
" how to" other user can say " use this command or this program".
It legal in this forum ? I think that yes. I see many messages like it.
For example : "use Adobe PDFWriter 4.0 " from Andy Kulik.
Regards,
Uri Chaplin
Senior PCB Designer
P.S. Why OHIO not share SKILLs to SourceLink ? Why Cadence not send
greate programs free ?
_____
From: Andy_Kulik@xxxxxxx [mailto:Andy_Kulik@xxxxxxx]
Sent: Wednesday, March 16, 2005 3:19 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: chaplin.u@xxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro 15.2 so59- Via Issue
Hello Uri,
please stop advertising your programs at this forum. We do not tolerate
any type of solicitation or 3rd part promotions or advertisments
Failure to comply will result in your removal from this forum.
Andy
PS: Why don't you share your great programs with all of us or post them
on sourcelink.cadence.com...
Uri Chaplianka
Sent by:
03/16/2005 02:51 AM
Please respond to
icu-pcb-forum@xxxxxxxxxxxxx
To
cc
Subject
[PCB_FORUM] Re: Allegro 15.2 so59- Via Issue
Hi !
1 - About vias. It not new, I remember it from v14.2 when I place via
and any plane exist it immediately connect to his net. And when exist
many ground vias and I delete ground plane they will be or connected to
other plane or unconnected. Because this problem I create SKILL
"ASSIGN_NET" and now you can with 2 clicks connect all vias that you
need ( by window or group ) to net that you need.
On http://skill.freespaces.com/ <http://skill.freespaces.com/> see how
ASSIGN_NET on Video Demo's.
Regards,
Uri Chaplin
Senior PCB Designer
e-mail : chaplin.u@xxxxxxxxx <mailto:chapli.u@xxxxxxxxx>
_____
From: Scott, Ron [mailto:rg-scott@xxxxxx]
Sent: Wednesday, March 16, 2005 1:43 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Allegro 15.2 so59- Via Issue
All,
I recently downloaded the current ISR and now some unsavory things have
happened:
1. If I have a standalone via, it is assigned a ground net
charateristic. I like to group vias when working with power distribution
but it doesn't do me any good when all the standalone vias are ground.
2. Very elementary, but I can't add vias to my via list. I can
physically add them to the chart but they don't show up in the design
drop down.
What happened?
Regards,
Ron Scott C.I.D.
Texas Instruments
Storage Products Group
Tel: 214.567.4715
Cell: 972.816.7978
rg-scott@xxxxxx
Other related posts:
