[PCB_FORUM] Re: ".ASC"
- From: Les Wong <maveric0@xxxxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Tue, 2 Oct 2007 10:27:45 -0700 (PDT)
Soledad:
I believe the .cad file they are requesting is an
output from the utility called CDC2FAB. It used
to be called fabmaster.
We received this utility from the vendor in the past.
I can see if I can find a copy.
Les
--- Soledad Attia <SAttia@xxxxxxxxxxxxxx> wrote:
> Thank you all,
>
>
>
> I'm waiting for the reply from vendor to see if they
> can give me a
> script or
>
> A sample of what they need.
>
>
>
> Thanks for all of your suggestions, they have been
> very helpful
>
> Regards
>
>
>
> Soledad
>
>
>
>
>
>
>
> ________________________________
>
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On
> Behalf Of Glaze, Darwin
> Sent: Tuesday, October 02, 2007 8:59 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: ".ASC"
>
>
>
> Soledad,
>
>
>
> One of the vendors we use requires that I open the
> .cad file and replace
> the word GEOMETERY (every instance of the word) with
> FULL_GEOMETERY.
> They kept saying that the cad file wasn't a ASCII
> file until changed the
> file. Don't ask me why but it worked for them.
>
>
>
> Hope this helps.
>
>
>
> Darwin Glaze
>
> Ball Aerospace
>
>
>
> ________________________________
>
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On
> Behalf Of Soledad Attia
> Sent: Tuesday, October 02, 2007 9:38 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] ".ASC"
>
>
>
>
>
> Hello all,
>
>
>
>
>
> Thanks to all who helped with the ".CAD" file ; I
> generated the file and
> sent to vendor;
>
> But now they are saying this format is not a
> standard CAD format,
>
> They need an .ASC file for ICT fixturing.
>
>
>
> Does anyone have any idea?
>
>
>
> Thanks for again for your help
>
>
>
> Soledad Attia
>
> Printronix Inc.
>
>
-----------------------------------------------------------
> To
> subscribe/unsubscribe: Send a message to
> icu-pcb-forum-request@xxxxxxxxxxxxx with a subject
> of subscribe or
> unsubscribe To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
-----------------------------------------------------------
>
>
>
> This message and any enclosures are intended only
> for the addressee.
> Please
> notify the sender by email if you are not the
> intended recipient. If
> you are
> not the intended recipient, you may not use, copy,
> disclose, or
> distribute this
> message or its contents or enclosures to any other
> person and any such
> actions
> may be unlawful. Ball reserves the right to monitor
> and review all
> messages
> and enclosures sent to or from this email address.
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
